Threaded safety valves

... Breather Valve requires no field maintenance. Corrosion-resistant materials are used throughout. The valve seal is made of silicone rubber. Each valve comes complete with a nut and o-ring, ...

Pressure: 40 bar

Type: Safety Relief valves Connections/Rating: Threaded BSP/NPT, PN-40 Dimensions: 1/2″ x 3/4″ to 2″ x 2″ Material: Stainless steel 316 L Applications: Steam, gases, vapour and liquids ...

DN: 10 mm - 25 mm
Pressure: 25 bar

... spring types – cast iron GG-25, GGG-40, cast steel GS-C25, stainless steel – PN1,6 – 10 MPa – DN 20×32 – 400×500 – flanged or threaded ends – for air, steam, gases or marine use – DIN standards

DN: 80 mm
Pressure: 0.2 bar - 40 bar

flange-safety valve DN80/DN80 Einstelldruck 0,2 up to max. 40 bar for liquid and gaseous media made of cast steel 1.0619+N with lever product: - flange-safety valve temperature: ...

Thread Full Lift Safety Valves can be used on systems where the discharge is relatively simple. The pressure in the discharge system can be atmospheric, at a constant level or where the ...

Controlled pressure: 0 bar - 1.2 bar

Installation into pipelines as inline detonation flame arrester e. g. for the protection of ignition gas lines or measuring devices. Applicable for all materials of the explosion groups IIA1 up to IIA with a maximum ...

Controlled pressure: 0.1 bar - 45 bar
DN: 0.38 in - 2 in

V651 Series safety relief valves are produced as safety and relief type. Safety valves are pressure relief elements used to evacuate excessive pressure ...

Controlled pressure: 2 bar - 485 bar
DN: 80, 59, 36 mm
Flow rate: 5.7 m³/h - 461.3 m³/h

Maximum operating pressure (bar) : 500 Gas compatibility : See commercial sheet

Controlled pressure: 5 bar - 55 bar
DN: 0.5, 0.13, 0.38 in
Flow rate: 11.3 m³/h - 111.6 m³/h

Cryogenic Safety Valves Type 06011 is made with stainless steel. It is provided as a safety device for protection against thermal expansion in pipework and parts of facilities. ...

Controlled pressure: 0.5 bar - 7.4 bar
DN: 2.5 in
Weight: 3 kg

2½” MEGA SUPERVENTIX™ threaded safety relief valve is designed to protect tanks against accidental overpressure and excessive vacuum. With a smart compact design, the 2½” BSP MEGA SUPERVENTIX™ ...

Controlled pressure: 1 bar - 45 bar
DN: 7 mm - 20.5 mm

Free Exhaust Valves - SA series The safety valves produced are of the direct loading type and are used to protect the components on which they are to protect the elements on which ...

Controlled pressure: 40 bar
DN: 0.5 in - 2 in

Threaded safety valve that meet requirements of EN standard according to PED/CE directive, in stainless steel material available either BSP or NPT threads.

DN: 0.25 in - 1.5 in

HEROSE cryogenic angle safety valve with lifting device. Degreased for oxygen. Cryo - Degreased

Controlled pressure: 10.3 bar - 31 bar

... XX.X denotes setting in Bar to 1 decimal place Category 4 PED compliant High flow capacity Non-stick teflon valve seat Tamper proof with sealing wire Test certs available on request

Controlled pressure: 115 psi - 200 psi
DN: 0.25 in - 0.5 in

Controlled pressure: 25 psi - 350 psi
DN: 0.38, 0.25, 0.13 in

... -350 psi (3/8" NPT) U200C-1M 1/8" MNPT x Vent Max Pressure Orifice Size.155 Flow Coefficient: Cv:Consult Factory Cracking Pressure Currently Available80-225, 5 psi increments 1/4" MNPT x Vent Max ...

Controlled pressure: 16 bar - 40 bar
DN: 200, 100, 150, 50, 80 mm

... Orifice Air Valve Manufacturer In USA, Canada and have been providing quality valves at competitive price. Class: PN10 to PN25 ANSI 150 to 300 Size: 1" to 8" Body Materials: Ductile Iron, ...

DN: 20 mm

DN G Ø e Ø s x 6 H/h Weight(kg) 12 3/8'' 8 6 81/8 0,210 4SEL12 568,84€ 15 1/2'' 8 6 84/8 0,220 4SEL15 568,84€ 20 3/4'' 9.75 9,5 101/9 0,520 4SEL20 673,18€ 25 1'' 13 11 126/9 0,880 4SEL25 1 009,54€