Threaded valves

DN: 1 in - 2.5 in

TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism.

DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C

Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks to its stability, ...

DN: 0.25 in - 1.5 in
Pressure: 5 psi - 150 psi
Temperature: 70 °F

... Series Pressure Regulator Valves is specifically used in pharmaceutical, landfill service, metal finishing and plating, chemical processing, and aquaculture application. It comes with a threaded type ...

DN: 0.375 in - 4 in
Pressure: 28, 35, 42 bar
Temperature: 185 °C

DN: 10 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 110 °C

... control valve with ceramic technology and integrated ultrasonic flow measurement, temperature measurement and pressure measurement and integrated PID control. Features Integrated Temperature Sensor Integrated Pressure ...

A needle valve is a type of valve which can be used to regulate flow of a substance, usually either gas or water, through an appliance or system. The unique feature of the value is the inclusion of a ...

DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C

... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of ...

DN: 0.5 in

Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. These components are also critical from the quality point of view as they ...

DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C

The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping of ...

Pressure: 10 bar
Temperature: 65 °C

Front control valve, inlet and outlet G1/4" female, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet / Outlet: ...

DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... against water hammer male union thread with plugged drain port Pt1000 temperature sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium ...

DN: 5.5, 0.563, 0.75, 0.375, 0.25 in
Pressure: 20,000, 10,000, 15,000 psi
Temperature: 450, 800, 350, 200 °F

Medium Pressure (coned & threaded) type connections for 1/4", 3/8", 9/16", 3/4", 1" and 11/2" O.D. tubing. Non-rotating tip stems are standard on LF4, LF6 and LF9 for on-off service and ensure long life on valve ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

... industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded acc. to DIN-259.

DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C

... shut-off valve is arrested even without a shift lever. Various additional flanges and parts permit direct fixing to an oil tank (T-flange) or incorporation in a pipe (threaded bush). Thanks to the ...

DN: 3 in - 16 in

Production of complete plug valves or independent components for plug valves. In-house manufacture of the different components for plug valves: caps, bodies, sleeves, etc. Wide experience ...

DN: 0.5 in - 4 in
Pressure: 16, 25, 40 bar

STANDARDS OF MANUFACTURE ISO228-1 GAS THREADED MATERIALS BODY DN½”÷1” – PRESSED BRASS EN 12165 DN1”¼÷4” – BRONZE EN 1982 DIAPHRAGM NBR EN 681-1 SEAT AISI303 STAINLESS STEEL EN 10088-1 GASKETS NBR EN 681-1 CERTIFIATES D.M. ...

DN: 0.25, 0.375, 0.5, 0.75, 1 in
Pressure: 0 bar - 400 bar
Temperature: 0 °C - 240 °C

Indumart Needle Valves are high pressure isolation valves suitable for shutting-off the impulse line and for mounting to pressure instruments. They are mostly used in oil, gas, Chemical, petrochemical, ...

DN: 0.25 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -20 °F - 450 °F

... pressure 1/4"~2" 1000 psi W.O.G; 2-1/2"~3" 800 psi W.O.G; 4" 600 psi Temperature range -20° to 450°F End types threaded with Locking device Locking lever handle

DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -10 °C - 130 °C

Brass butterfly valve full bore, F/F threaded with throttling.

DN: 0.5 in - 3 in
Pressure: 150 psi

SIZE: 1/2＂～3＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) WORKING PRESSURE: 150PSI

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar

Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating ...

DN: 1, 1.25 in

Our Eco Line gate valve is our gate valve in composite material with high strength and metal-like properties. The material technology and product design give the gate valve extremely ...

DN: 25 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

Sanitary clamp pneumatic butterfly valve Design Features Seats: EPDM,NBR,FPM,VMQ End connections: Threaded, weld, clamp Standard: 3A,DIN,SMS,IDF,ISO Gasket: complies with PTFE FDA 177.2600 This ...

DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C

Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° C and 16 bar ...