Transfer pumps

Flow: 0 l/min - 820 l/min
Head: 35 m
Power: 7.5 kW

... Rubber Impeller Pump For Seaweed Model Pumping Up Seaweed at Once, And Transferring it without Damage • Adopted special impeller to avoid damage by seaweed. • Special sleeve to transfer seaweed ...

Pressure: 4 bar - 6 bar
Length: 1,300 mm
Width: 1,200 mm

• Requires only food compatible lubricants on product handling components. • Ergonomically placed controls • Easy to use • Available with a variety of flexible and fixed pipework • Designed to accept Euro Tubs • Lockable castors ...

Flow: 1.3 l/min - 35 l/min
Power: 400 W
Length: 417 mm

... Flow Rates Pump is ideal for high flow rates fluid transfer. The flow rate is from 1.3L/min to 15mL/min. Large Flow Rates Pump JL350-2J is driven by the AC motor, and the speed is controlled ...

Weight: 13.2, 14.2 kg

Heavy duty siphon & air hand-held pump Hand-held siphon pump Direct transfer pump Suitable for petrol, oil, diesel, water etc. Also acts as an air pump ...

Flow: 70 m³/h - 324 m³/h
Head: 10 m - 40 m
Power: 60 kW

The slurry pump is a type of centrifugal pump, designed for pumping liquid containing solid particles in mining, metallurgy,coal washing ,sewage water treatment,power plant,dredging.and chemical and petroleum industries ...

Flow: 59 m³/h
Head: 24 m
Power: 4 kW

... air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated with other priming systems. Our ‘D Pumps’ offer high efficiency ...

Flow: 0.5 m³/h - 28 m³/h
Head: 0 m - 77 m
Fluid temperature: 0 °C - 90 °C

The Lubi MH, MHI and MHN pumps are non-self priming, horizontal, multistage, centrifugal pumps. Motor and pump are close coupled in a convenient and compact design for ...

Flow: 4.5 m³/h
Head: 25 m
Fluid temperature: 90 °C

Volumetric Stainless Flexible Impeller Pumps, are mostly suitable for the transfer of delicate, fragile and viscous medium, also with solid parts in suspension Features Immediate priming at a depth ...

Flow: 220 m³/h
Pressure: 16 bar
Head: 140 m

PROLAC HCP is a range of close-coupled centrifugal pumps with hygienic design, compact and highly efficient. It is made of a cold-formed stainless steel casing, impeller, mechanical seal, pump ...

KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...

Flow: 0 m³/h - 100 m³/h
Pressure: 15 bar
Power: 0.5, 11 kW

... "SN" pumps are particularly suitable for transferring delicate or shear sensitive products. Including liquids or creams with suspended non-abrasive particles. Thanks to the special helical shape of the AISI 316L stainless ...

Flow: 5 l/min - 45 l/min
Pressure: 8 bar
Head: 6 m - 53 m

Volumetric pump with liquid ring impeller that gives considerable suction power to the pump. Particularly suitable for liquid transfer (including volatile liquids). The model has a brass ...

Flow: 0 us gal/min - 1,450 us gal/min
Head: 0'00" ft - 110'00"
Power: 0.5 ch

This portable pump is perfect for boosting waterpressure, draining hot water tanks and general water transfer. Features include: One-piece cast aluminum pump and motor housing with ...

Flow: 10 m³/h - 100 m³/h
Power: 1.5 kW - 7.5 kW

QK series cutting sewage pump is make up of three parts: water pump, sealing box and motor. At the top of the pump is the motor. Use cement alloys mechanical sealing to connect pump ...

Flow: 20 m³/h - 125 m³/h
Pressure: 16 bar
Head: 20 m - 125 m

... and it is installed on the base with the motor. How can centrifugal pump pump oil？The support of LQRY series waste oil transfer pump adopts the structure of double-end ...

Flow: 18, 15 l/min
Pressure: 8 bar
Head: 1 m - 70 m

Product Code : A8-A1-1 Fluid Inlet-Outlet : 1/4'' NPT Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm Material : PTFE Valve Ball Material : PTFE Valve Seat Material : PTFE Product Code : A8-AS-1 Fluid ...

Flow: 0.1 m³/h - 300 m³/h
Pressure: 0 bar - 48 bar

As sludge transfer pumps, the K range is high performance industrial progressing cavity pumps. This PCP, available in block or long coupled configuration, can be manufactured in different ...

Flow: 9 us gal/min - 215 us gal/min
Head: 15 m - 92 m
Power: 0.08 ch - 5 ch

The T-Mag AM Series Mag Drive Pump consists of three sizes of a Mag Drive Pump, the 1/12, 1/4 and 1/3 HP. The fractional sizes are for low flow applications looking for a compact and ...

Flow: 6 m³/h - 75 m³/h
Head: 7.2 m - 38 m
Fluid temperature: 95, 65 °C

These horizontal centrifugal pumps are operated by a direct-drive motor (max. 3.000 rpm). They are especially suitable for a fast transfer of chemicals when emptying containers or tanks as well as for ...

Flow: 3 m³/h - 1,800 m³/h
Head: 2 m - 66 m
Fluid temperature: 0 °C - 40 °C

The two are separated by an oil chamber and a mechanical seal assembly. Divided into fixed automatic coupling installation and mobile installation Features and advantages The two are separated by an oil chamber and a mechanical seal ...

Flow: 0.3 m³/h - 36 m³/h
Pressure: 4 bar - 15 bar

... meet the demands of food manufacturing customers. The pump is coupled to a screw auger (usually from a hopper above) that delivers the product into the pumping chambers as well as driving the pump. ...

Flow: 2.5 l/min
Pressure: 6,000 bar
Power: 27 kW

... is the innovative High Efficiency (90%) 100% ELECTRIC Servo Intensifier Pump able to generate a pressure up to 6.000 Bar. The Numerical Control synchronizes the working pump cycles of the double ...

Flow: 7 us gal/min - 370 us gal/min
Pressure: 10.3 bar - 31 bar

Circumferential piston pumps, interchangeable with other brands The QP Series is characterized by being Universal - ly interchangeable with other brands in the market, even improving the spare parts quality. Certificates: ...

Flow: 50 l/h - 1,550 l/h
Pressure: 16 bar

... integration into equipment. The engineered polymer coupling guarantees the correct coupling of the pump to the motor and prevents thermal heat transfer to the motor.

Power: 0.55 kW - 1.5 kW
Input diameter: 50, 34, 40 mm

... our flexibility in the production phase, we can offer many models, adaptable to all milking rooms. Our milk pumps ensure an optimal transfer from the receiver jar to the refrigeration tank. The milk ...