Tungsten carbide nozzles

Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar

The modern design of these nozzle offers the same advantage as the full size HW nozzles. In addition it makes possible to use a smaller pitch between the nozzles allowing for a higher ...

Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar

... path of the nozzle orifice has been redesigned completely to reduce energy losses caused as a result of turbulence, the elimination of all sharp cross section changes has resulted in a significant increase in water velocity ...

Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar

The modern design of these nozzle offers the convenience of a more rational alignment system, with a copper seal used between nipple and nozzle tip. The nozzle efficiency is enhaced by ...

Orifice diameter: 0.01 in - 0.06 in
Flow: 0.18 l/min - 13.7 l/min
Pressure: 0 psi - 7,500 psi

Speedy 5 Reversible/Switch Tips - High-pressure up to 7500 PSI / 517 Bar The quality of your work is only as good as the quality of your finish. Don't compromise on quality, choose the Exitflex, Swiss-made tips ...

Orifice diameter: 0.15 mm - 0.6 mm
Flow: 0.14 l/min - 1.95 l/min
Pressure: 100 bar

Tip sizes to be defined depending on applications SF Airless Flat Tip SS Body The reference nozzle in the wood and Leather industries Robotic applications

Orifice diameter: 0.01 in - 0.06 in
Flow: 0.09 l/min - 11 l/min

The 63-611, manufactured by Exitflex, is an air assisted airless tips that integrates high-quality tungsten carbide inserts. It is capable of providing optimum erosion resistance in all ...

... this abrasive blast (sandblast) nozzle features a tungsten carbide liner encased in an aluminium jacket, offering the greatest resistance to impact or flexing. Supplied with a rubber ...

... is needed, this abrasive blast nozzle mixes water with the abrasive, reducing the amount of dust displaced into the atmosphere. Featuring an aluminium jacket which provides strength and endurance, this abrasive blast ...

The abrasive blast (sandblast) nozzle is ideal for getting inside tight or hard to reach places such as behind flanges, around corners or inside pipes. The angled nozzle is compact, shoots out the abrasive ...

Orifice diameter: 3 mm - 10 mm

Venturi type, flanged, tungsten carbide with external aluminium cover, for small and medium productions

Orifice diameter: 5.5 mm - 12.5 mm
Flow: 850 l/min - 9,700 l/min

Venturi type, threaded, tungsten carbide with external aluminium and polyurethane cover, for large productions Venturi type, threaded, boron carbide with external aluminium and polyurethane cover, for ...

Orifice diameter: 6.5 mm

boron carbide banana type, threaded, tungsten carbide

BLAST NOZZLES THEIR DIAMETER DETERMINES AIR AND ABRASIVE CONSUMPTION Tungsten carbide round nozzle Tungsten carbide venturi nozzle Silicon ...

Orifice diameter: 0.5 mm - 3.5 mm
Flow: 50 l/min - 5,000 l/min
Pressure: 40 bar - 350 bar

... increased nozzle life, improved uniformity, density or solubility. CONSTRUCTION AND MATERIALS - 5 piece construction with ‘O’ ring seals. - Nozzle body and adaptors are available in 316 Stainless Steel. - ...

Orifice diameter: 0.45 mm - 2.16 mm

... overlapping to produce an even distribution when used in multiple nozzle system. High pressure body design with replaceable insert. A wide range of flow rates and spray angles. 0° nozzle sizes ...

Orifice diameter: 2.8 mm - 5.2 mm

... spray angles of 25° and 32°. CONSTRUCTION AND MATERIALS Unique connection nozzle/body for positive alignment. Cap, mild steel. Orifice assembly, tungsten carbide orifice ...

... sandblasting nozzle is designed to blast the inner surface of the pipe, and its inner diameter ranges from 50 mm (2”) to 150 mm (6”). The cone-shaped sandblasting tool has a built-in short venturi nozzle ...