Turbine flow meters

Process temperature: -450 °F - 450 °F

... is a Turbine Flow Meter made up with 316 stainless steel material and is used for transferring and flowing applications. This device is equipped with a blade rotor and flanges that is ...

Process temperature: 0 °C - 150 °C
Process pressure: 0.2 bar - 300 bar

A turbine flowmeter operating on the Pelton wheel principle for low flowrate applications on low viscosity fluids. Conventional axial flow turbine meters ...

Volumetric flow rate: 650 m³/h - 2,500 m³/h
Process temperature: -25 °C - 55 °C

... METERING IMTM Turbine Meter Designed to measure gas velocity, the operating principle of the turbine meter incorporates an innovative method of conditioning flow ...

Volumetric flow rate: 0.6 m³/h - 4,500 m³/h
Process temperature: -30 °C - 120 °C
Process pressure: 0 bar - 45.1 bar

The EX Turbine from OVAL is a highly accurate turbine flowmeter especially designed with a wide viscosity range, such as low Reynolds number area. This series is best used for applications ...

ZTM series gas turbine flow meter is equipped with mechanical counter it’s a kind of meter don’t run slowly with high flow measurement ...

Volumetric flow rate: 10 l/min - 150 l/min
Process pressure: 0 bar - 3.5 bar

... Measuring system: turbine • Power supply: 12V DC – 10mAh • Pulse signal: 100 pul/litre • Output position: right, left • Inlet/Outlet [BSP/G]: 1” F Options • available in the version for Ad Blue® • also available with ...

Volumetric flow rate: 3.8 l/min - 760 l/min

A full line of FLOMEC® G2 Series Precision Turbine Meters are available in a variety of housing materials. Rugged and dependable, the G2 Series offers: Stainless Steel for most chemicals and fuel products ...

Volumetric flow rate: 35 m³/h
Process temperature: -40 °C - 350 °C
Process pressure: 100 bar

... Metri IC-IPM Insertion Paddlewheel Meter (IPM) Series is the ideal liquid flow meter for insertion into pipe sizes ranging from 40mm to 300mm. Simple to install and operate, this cost ...

Volumetric flow rate: 0 m³/h - 800 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 86,000 Pa - 106,000 Pa

... diameter type 2.Alcohol,fuel,oil 3.female thread connection GTF300 diesel turbine flow meter is a new generation turbine flow meter ...

Process temperature: -50 °C - 150 °C
Process pressure: 0 bar - 40 bar

... velocity in the pipe line, therefore the flow measurement is volumetric. The FLEMCO flow meters are backed by international standards covering flow calculation, manufacturing ...

Process temperature: -20 °C - 120 °C
Process pressure: 0 MPa - 6.3 MPa

The FLGY series turbine flowmeter adopts advanced techniques at home and abroad, with the advantages of simple structure, light weight, high precision, good reproducibility, sensitive response, convenient ...

Process temperature: -20 °C - 150 °C
Precision: 0.5, 0.2 %

Q&T Liquid Turbine Flow Meter is internally developed and perfected by Q&T Instrument. Over the years, Q&T Liquid Turbine Flow Meter ...

Volumetric flow rate: 0.2 m³/h - 350 m³/h

Flow meter for Clear Liquids: Process Control Devices manufacture various digital flow meter used in industry as per fluid property. Turbine flow ...

Volumetric flow rate: 0.1 l/min - 2.5 l/min
Process temperature: -20 °C - 100 °C
Process pressure: 0 bar - 25 bar

The Vision 1000 is a compact turbine flowmeter. The turbine flows on a 0,1 to 2,5 L/min. The device is composed of a digitally pulsed output. The materials are made of FDA. The device ...

Volumetric flow rate: 1.5 m³/h - 20 m³/h
Process temperature: 90, 130, 40 °C
Process pressure: 16, 25 bar

Our series of turbine and Woltmann meters allows numerous applications with the widest range of products, from mains and demineralised water to all the most aggressive chemical products. The available ...

Volumetric flow rate: 1.6 m³/h - 1,600 m³/h
Process pressure: 0 bar - 4 bar

Turbine wheel meters for measuring gas flow on gas consumption equipment, for gas burner adjustment, for gas and air. Features & Benefits: DM: mechanical index ...