Valves

Flow rate: 55 l/min - 600 l/min

The valves for the GMV power units are packed with technology meant to last over time and offering unparalleled reliability. Hundreds of thousands of elevator systems running with our products are an unequivocal proof ...

DN: 25 mm

Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female.

... by butterfly valves. Gearboxes are designed to enable butterfly valves to be opened by one person manually by turning the handwheel under rated pressure acting from one side. It is lockable and does not ...

Pressure: 250 bar
Flow rate: 20 l/min - 80 l/min

... diverter valves and 8-way diverter valves. The 6-way diverter valves can be both single, or stackable. Our range of diverter valves cover from 20 l/min until 80 l/min, ...

... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk ...

DN: 15 mm - 150 mm
Pressure: 40 bar
Temperature: -40 °C - 300 °C

The valve is fitted directly in the process line or on a by-pass. A constant flow through the valve guarantees a directly representative sample

DN: 200 mm - 4,000 mm
Pressure: 25, 10, 40, 16 bar
Temperature: 0 °C - 80 °C

... to be removed with the valve remaining in service in the open or closed position. Operated with gearbox + handwheel and with ISO 5210 top flange to be coupled with an electric actuator, if required at a later date. Valve ...

Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C

Seal in the drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up ...

DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h

Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...

DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C

... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of ...

DN: 0.5 in

Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. These components are also critical from the quality point of view as they ...

... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

DN: 0.5 in - 12 in
Pressure: 100 psi - 290 psi
Temperature: -29 °C - 316 °C

... Design and Testing Standards​ API 598 Valve Inspection and Testing PED Design and fabrication of pressure equipment API 599 Metal Plug Valves-Flanged, Threaded and Welding Ends ISO 10423 Valves ...

Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F

Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or ...

DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C

The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...

DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C

Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...

Pressure: 40 bar
Temperature: -40 °C - 150 °C

... Gas, Chemical, Water Treatment DESCRIPCIÓN: FEATURES Connections: NPT (ANSI/ASME B1.20.1) and ISO 7 Rp Materials: These valves are supplied in nickel plated finish, for ISO 7 Rp thread. Brass 58 body. Ball made of ...

DN: 0.5 in - 8 in

Split body, Full bore Flanged connections Blowout-proof stem Non-removable antistatic devices Cavity pressure balancing hole Live Loaded Packing STANDARDS API 6D PED Quality Standard MSS SP 55 All wetted component materials meet NACE ...

Pressure: 0 bar - 500 bar

... actuated ON-OFF Valves Designed to be used in steel working and metallurgical industries Stroke regulation up to size 09 Very Smooth valves response (No shocking impact) Easy maintenance Metal to ...

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... and AF6 for on-off service and insure long life on valve seats. Regulating tip stems are available at no additional cost, add - REG to the catalog number. Glands and sleeves are supplied with each valve ...

DN: 2 in - 48 in

Reliable operation Longer wear life Open Body Design ejects material from the bottom and prevents the gate from jamming 100% bubble tight seal Reduced operation costs Applications Mining and mineral processing Mineral Sands Cement Sand ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...