Valves

DN: 20 mm - 63 mm
Pressure: 10 bar

... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness.

DN: 0.5 in - 8 in
Pressure: 0.5 bar

Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar.

DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C

DN: 16 mm
Pressure: 0 mbar

Category - Angle valve, manual, KF, aluminium Actuation - manual via hand wheel Item description - KF Angle Valve, DN16 manually operated materials: - body aluminium - valve plate, ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C

... resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, effectively blocking the corrosion of the valve in the medium of corrosion of metal ...

DN: 50 mm - 500 mm
Pressure: 0.1 bar - 1.5 bar
Temperature: -25 °C - 80 °C

The disc valve is used for dust tight and (as an option) pressure tight locking of a hopper with bulk solids, or as a locking valve in pipelines for gases. • Dust-proof, pressure-tight, vacuum-tight ...

DN: 2, 1.5, 1.25, 1 in
Pressure: 300 psi

• Test and drain valves are compact 3-position ball valves with drain orifice having k-factor 5.6 or 4.2 (optional) • 3-positions consist of OFF, TEST and DRAIN • Brass construction (ASTM B584) • Integral ...

DN: 15 mm - 800 mm
Pressure: 1.6 MPa - 25 MPa

... is good 　　◎It can be used on ring network pipeline whose medium flows towards two directions 　　◎Structure length is short 　　Valve material 　　TA1,TA2,TA10,Gr C-2,Gr C-3,Zr702C,Zr705C,N6,N200,CZ-100,M35-1,N06600,CY40,N12MV,CW12MW,CN7M,4A,6A,HK30,etc. 　　Performance ...

... patent-pending technology that includes high-temperature seals and adjustable valve pins, the system provides a flawless injection molding process. Speak to us today about our VeriShotᵀᴹ Single Valve ...

DN: 50 mm - 1,200 mm
Pressure: 1.6 MPa - 160 MPa
Temperature: -46 °C - 600 °C

GB Gâte Valve is suitable for the nominal pressure (CL150-CL2500),, chemical, thermal power plant and other conditions of the pipeline, eut off or connect the pipeline medium. Main material: carbon Steel, stainless ...

Pressure: 280 bar
Flow rate: 20 l/min

... the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages Operation Counterbalance Valve with pilot assist are meant to control ...

DN: 0.5 in - 36 in

... side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all ...

Pressure: 300 psi
Temperature: 149 °C

Overview This valve is installed in the downstream of sampling systems/heat exchanger. The valve responds only to temperature. Under normal operation, the valve is fully open. If the ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way ...

Pressure: 0 bar - 7 bar

... microfluidic valve for injection or selection of up to 10 different fluids or chips. The flow is bidirectional in the valve. The device can be used as a selector or as a distributor for either multiplexing ...

DN: 20 mm - 200 mm
Pressure: 16, 40, 64 bar

Body: WCB, WCC, WC6, SS304, SS316 Bonnet: WCB, WCC, WC6, SS304, SS316 Seat: SS304, SS316, SS316L End Connection: Flanged, RF, MF, RTJ Welding: Socketweld, Buttweld Packing: PTFE, Graphite Gasket: Metal Graphite Actuation ...

DN: 12.7 mm - 203.2 mm

... Series is a two piece, full port, flanged end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve ...

DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 426 °C

Complete SS construction, AISI 304, (Suitable for blowing out dirt from strainer element)

DN: 12 mm
Pressure: 0 bar - 40 bar
Temperature: 1 °C - 60 °C

Unblockable motorised ball valve drain The TEC-44 is a powerful timer controlled motorised ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. The ...

DN: 1.411 mm
Pressure: 50 psi - 25,000 psi

... Pressures. Provide Air Signal. These valves perform a function similar to a pressure switch. The sensing piston or plunger movement is spring or air adjusted. When the sensed pressure is reached, a small, integral air ...

... Pneumatic Actuators for Remote Valve Operation Types Normally Closed – Air is required to open the valve Normally Open – Air is required to close the valve Double Action ...

... Directional Proportional Valve: The solution to pollution issues and the dangers correlated to the use of hydraulic oil. The new hydraulic and ecologic valve, called EXM1, has been developed and patented ...

DN: 15 mm - 350 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 650 °C

HIGH PERFORMANCE METAL SEATED BALL VALVES 1/2"-14" ANSI 150-900 Materials: 1.4408/CF8M, 1.0619/WCB, 1.4404/316L, 1.4308/CF8, 1.4571/316Ti, Duplex, Hastelloy, Monel Live load state of the art sealing system Floating ...

DN: 10 mm - 80 mm
Pressure: 25 bar - 40 bar
Temperature: -10 °C - 120 °C

Full bore FPM shaft “o” ring PTFE ball seats Brass valve BSP threaded Nominal pressure: - 1/4” to 1”1/4 = 40 Bar - 1”1/2 to 4”= 25 Bar Working pressure: see pressure / temperature diagram Temperature = -10°C +120°C

DN: 25 mm - 200 mm
Temperature: -200 °C - 600 °C

Neles series X modular ball valve, incorporates robust stem to ball connection in seat supported models. Application based seat selection assures valves are capable of delivering long lasting tightness. ...