Valves for industrial applications

DN: 3 mm - 24 mm

M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...

DN: 8 mm - 100 mm
Pressure: 0 bar - 63 bar
Temperature: -20 °C - 200 °C

2-way, 2-way manual or 3-way: the stainless steel ball valve VZBE controls various media, in both process automation and industrial automation. • 2-way manual, with lockable hand lever • 2- and 3-way ...

DN: 15 mm - 63 mm
Pressure: 40, 25 bar
Temperature: -20 °C - 150 °C

The ball valve series VAPB offers high-quality ball valve solutions with full through-flow, for industrial applications. In brass (MS) or stainless steel (CR) for enhanced ...

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -10 °C - 200 °C

For trouble-free control of aggressive media or gases in piping systems: the automatable 3-way ball valve VZBA in stainless steel. • Automatable 2-way or 3-way ball valve • Stainless ...

DN: 10 mm - 65 mm

Parker's 3/4" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating ...

DN: 8 mm - 25 mm
Pressure: 10,000 psi - 20,000 psi

... these valves provide dependable and trouble free service in wide variety of applications. Markets: • Oil and Gas • Petrochemical • Chemical • Research Features/Benefits: • ...

DN: 0.063 in - 0.118 in
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 232 °C

... ’s hand valves are used in every industry in a wide range of applications - anywhere where accurate and secure control or metering of steam, air, gas, oil, water, or other non-viscous ...

DN: 25 mm - 150 mm
Pressure: 10, 6, 8 bar
Temperature: 140 °C

The SWcip4 valve is a double seal valve designed especially for CIP applications. The valve replaces old-fashioned block and bleed concepts based on three butterfly valves ...

... with integrated pneumatic actuator is a valid option due to its compact overall dimensions. The special geometry of VL Slide Valves and the various options in blade design enable their application ...

DN: 200, 150, 300, 250 mm

... machines, or pneumatic conveying of materials showing poor flowability, the use of a VSS Ball Segment Valve may be the most appropriate choice. VSS Ball Segment Valves can be used in ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C

... controller IPC Pneumatic and electro-pneumatic positioner type 8047 - 2-wire - Ex version Positioner with mounting acc. to NAMUR standard Accessories - Metal bellows Limit switch Position ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C

... - IO-Link - Integrated process controller IPC Pneumatic and electro-pneumatic positioner type 8047 - 2-wire - Ex version Accessories - Metal bellows Limit switch Position feedback Pilot valve . ...

DN: 15 mm - 125 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 230 °C

This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled ...

Pressure: 350 bar

Pump element Medium: oil / grease Dosing volume per stroke and outlet in cm³: 0,08 / 0,15 / 0,22 max. delivery pressure in bar: 350 Number of outlets: 1

Pressure: 30, 700, 55, 60, 500 bar
Temperature: -40 °C - 80 °C
Flow rate: 25, 180 l/min

... The two-stage valve type NE is used with directional valves to control double-acting hydraulic cylinders. Features and benefits: Direct mounting on hydraulic power packs Direct ...

DN: 3 mm
Pressure: 350 bar
Temperature: -40 °C - 80 °C

... dividing tasks, e.g. if two hydraulic consumers with varying loads supplied from one pump are to be moved simultaneously without interaction. Features and advantages High dividing accuracy Intended applications ...

Pressure: 30 psi
Temperature: 32 °F - 180 °F
Flow rate: 8, 0 l/min

... isolation valve like no other... Utilizing the industry's most robust and powerful miniature linear actuator, the patent pending stepper-controlled Eclipse proportional isolation valve leads the industry ...

DN: 0.25 in
Pressure: 50 psi - 5,000 psi
Flow rate: 0 l/h - 23 l/h

This high pressure miniature pressure compensating flow control valve is only .250” in diameter and 1.38” in length. This valve provides a constant flow rate over a wide range of pressure ...

DN: 0.281, 0.187 in
Pressure: 0 psi - 5,000 psi

... Lee Company’s dual metering flow control valves are 2-way restrictors that allow a designer to specify a different metered flow rate in each direction. These valves are ideal for high-pressure hydraulic ...

DN: 0.375 in - 2.5 in
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 130 °C

Directly operated angle seat valves are ideal solutions for industrial applications requiring robust and resistant solutions. They are compatible with main gas ...

Pressure: 10 bar - 17 bar
Temperature: -20 °C - 65 °C
Flow rate: 21 l/s

Assists machine designers in complying with the European Machineries Directive Can help existing machinery to comply with PUWER (Provision and Use of Work Equipment Regulations) Controlled increase of downstream ...

DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C

The GEMÜ F40 2/2-way filling valve is designed for filling processes in aseptic and hygienic areas of application. Flow rates up to 6,600 l/h are possible ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

Diaphragm valve - R690 The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

The GEMÜ R677 2/2-way diaphragm valve has a low maintenance plastic bonnet and is manually operated. An integral optical position indicator is standard. The High-Flow valve body provides compact dimensions ...

DN: 40, 50, 65, 80, 100 mm
Pressure: 16, 10 bar

The FK is a butterfly valve for shutting off and regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance ...

DN: 125, 150, 200 mm
Pressure: 10 bar

The FK is a butterfly valve for shutting off and regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance ...

DN: 300, 250 mm
Pressure: 10, 8 bar

The FK is a butterfly valve for shutting off and regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance ...

DN: 20, 25, 15 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C

2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs

DN: 32, 40, 50 mm
Pressure: 40 bar
Temperature: -20 °C - 110 °C

PRO Range motorised valve – 2 way FF BRASS Description ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Operating time: 35 - 45 - 55 sec for 90° rotation Protected type, manual ...

DN: 40, 50, 32 mm
Pressure: 10 bar
Temperature: -15 °C - 50 °C

... microprocessor sends a modulating signal which régulâtes the valve opening and closing. Note: for a proper operation, there should always be a closcd hydraullc circuit ensurlng a flow on the mlxlng valve ...

Pressure: 4,200 bar

Manual valves for manual blocking of fluids. Available as straight or angled design.

Pneumatic Valve for blocking and opening. Usable as normally open and normally closed.

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... electric or pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after ...

DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain ...

DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system. The valves are mounted directly on the cylinder’s supplying ports and do ...

DN: 8 mm - 80 mm
Pressure: 6 bar - 8 bar
Temperature: -20 °C - 85 °C

3 PIECES BW BALL VALVE (58192) WITH STAINLESS STEEL PNEUMATIC ACTUATOR (50802)

DN: 8 mm - 80 mm
Temperature: -10 °C - 50 °C

2 PIECES F/F BALL VALVE (58308) WITH IP65 ELECTRIC ACTUATOR (50835)

DN: 20 mm - 50 mm
Temperature: -20 °C - 70 °C

3 WAYS F/F/F BALL VALVE WITH L BORE (58213) WITH IP68 ELECTRIC ACTUATOR (50844)

DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F

... the device. The PTFE needle valves are suitable for laboratory and industrial applications. It regulates corrosive gases and liquids for high pressure ...