Volume flow meters

Volumetric flow rate: 0.1 m³/h - 2,000 m³/h
Process temperature: 0 °C - 70 °C
Process pressure: 10 bar - 40 bar

Body material Steel epoxy coated Internal coating Ebonite (sauf DN<125 en PTFE) Connection Brides PN10/16/25/40

Reliable gas flow reading.

Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 10 bar

M3H and M4H are nutating-disk meters that measure the exact quantity of the dispensed fuel or lubricant. They are designed for non-commercial use only. These flow-meters are reliable, ...

Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 3.5 bar
Precision: 3 %

Flow meter for streaming liquids according to the measurement principle of a swashplate. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), RME, vegetable oil Plastic/aluminum ...

Process temperature: 60 °C
Precision: 1 %

Use the Doppler Ultrasonic Area/Velocity Sensor in open channels or pipes that run partially full to measure depth and velocity. Access to the monitoring point is required for installation and maintenance.

Process temperature: -40 °C - 60 °C
Process pressure: 0 psi - 50 psi

... system makes the Amazon Bubbler an attractive solution for real-time monitoring and data collection. The Amazon provides a continuous air bubble and an integrated pressure sensor that measures the pressure required ...

Volumetric flow rate: 50 l/h - 60,000 l/h
Process pressure: 10 bar

The flow meter operates on the float principle and is used for flow rate measurements in closed pipelines. The medium flows through the vertically installed flow ...

Process temperature: -45 °C - 85 °C

... Velocity Radar/Sensor uses OTT SVR 100 to measure flow in open channels and rivers continuously and without contact. For more information about it please visit: https://www.ott.com/products/water-flow-3/ottsvr-100-2406/ SenSpot™ ...

... inductive flowmeters for the dosing of water. With the mechanical flowmeter dosing takes place using a standard mechanical clock. The magnetic inductive flowmeter is used when ...

... Ultrasonic Flow Sensor [Features] ● Measurement: Flow rate ● Measuring range:  Flow rate: 0~±30m/s;  Temperature (for heat meter function): Standard: -30~90℃; ...

Volumetric flow rate: 0.5 us gal/min - 10.5 us gal/min
Process temperature: -25 °C - 80 °C
Process pressure: 10 bar

The TF Series is a multi-function true union paddlewheel flow meter. The TF Series Paddlewheel Flow Meter provides high accuracy economically while ideal for thermoplastic ...

Volumetric flow rate: 15 l/min
Process temperature: 10 °C - 50 °C
Process pressure: 50 bar

Mechanical oval gears flow meter, with body in aluminium, for oil and antifreeze, with two totalizers Mechanical oval gears flow meter, for oil and antifreeze, with ...

The series inserted electromagnetic flow sensor, along with KD-mag series electromagnetic flow converter,makes up the inserted electromagnetic flow meter. Normally the ...

Volumetric flow rate: 1 l/min - 60 l/min

This range of oxygen flowmeter with humidifer is for the metered delivery of gas ,giving flow rates of between 1 and 15 L/min(other flow ranges available) in addition, it can provide ...

Volumetric flow rate: 40 m³/h - 313 m³/h
Process temperature: 0 °C - 50 °C
Process pressure: 16, 10 bar

STANDARDS OF MANUFACTURE EN 1092-2 DRILLING FLANGES MATERIALS BODY CAST IRON EN 1561 (OPT. EN GJS-400-15 EN 1563) CORROSION PROTECTION COATED INSIDE-OUTSIDE FIG.650 (FBE) EPOXY 300 MICRONS RAL 5005 FIG.650IRR (FBE) EPOXY 200 ...

Volumetric flow rate: 0.6 m³/h - 6 m³/h
Process temperature: -40 °C - 60 °C
Process pressure: 9.8 bar

... vibration during installation. At the same time, the flowmeter also has a small size and easy installation. This product is suitable for 10L / min flow rate or more models. when less than 10L / ...

Process temperature: 0 °C - 50 °C
Process pressure: 16 bar

... * check data Normally: - Horizontal position Note: - Avoid water hammering Design: - EN 14154:2005+A2:2011 - Brand: - B.METERS Standards: - A.C.S. N° 19 ACC LY 428 - Made: - Europe Italy Horizontal or vertical position ...

Process temperature: -20 °C - 60 °C

The air flow monitor is placed in the exhaust air flow of a cooker bonnet behind the grease filter and monitors whether the exhaust air really flows at the required and ...

Precision: 0.5 %

The VERIS Accelabar® is a new and unique flow meter that combines two differential pressure technologies to produce operating ranges never before attainable in a single flow meter. ...

Volumetric flow rate: 0.8 l/min - 90 l/min
Process temperature: -30 °C - 80 °C
Process pressure: 16 bar

Flowmeter incl. measurement section with threaded connection R 1/4, DN 8, Measuring range 0.8 - 90 l/min, PN max. 16 bar Calorimetric measurement system for monitoring changes in flow and consumption ...

Volumetric flow rate: 35 l/min
Precision: 0.5 %

... pneuMATO-FILL equipment. After calibration, the diespensed grease volume is displayed. Ideal for controlling the filling of Lube-Shuttle®-cartridges resettable with LCD Display maximum flow rate ...

Volumetric flow rate: 15 l/min - 37.5 l/min
Process pressure: 12 bar

The ZSJZ series water flow inductor is mainly applied in the sprinkler system. It is the flowing of water that to drive the blade and make the microswitch work by drive group. Thus the flow signal will ...

Intelligent Vortex Flowmeter Vortex flow-meter, a speed type flow meter, is widely used internationally for the implementation of measuring, detecting ...

It measures the quantity in litres of liquid passing through it. It works with flow rates from 10 to 90 lt/min and a maximum pressure of 3.5 bar. It displays the total liters up to 999999 liters and the partial liters ...

Model JL-2flow Monitor Description: This flow monitor is fit for operating in the liquid pipeline under ordinary temperature. It is a mechanism to monitor the flow. This ...