Volume flow meters

Volumetric flow rate: 0.6 l/min - 50 l/min
Process temperature: 0 °C - 100 °C
Process pressure: 0 bar - 10 bar

Our proven Q-Flow is a modern VA-flowmeter for gases built on the variable area principle. Designed in close collaboration with users, it combines our long experience and practical shop-floor requirements. Intelligent ...

Volumetric flow rate: 0 l/min - 3 l/min
Process temperature: -40 °C - 180 °C
Process pressure: 200 bar

... the robot’s dynamic behavior. The flowmeters have a very high resolution that supports extremely precise flow rate measurement across a very broad measuring range. Technical Data Linearity: ...

Volumetric flow rate: 0.5 us gal/min - 20 us gal/min
Process pressure: 300 psi - 1,500 psi
Precision: 5 %

Variable Area Vane-Style Flowmeter for 0.5 - 20 GPM General Applications (SN) The SN series has the following characteristics and/or options: Local indication of flow rate. Mechanical pointer Mechanical ...

Process temperature: -10 °C - 120 °C
Process pressure: 0.6 MPa - 4 MPa
Precision: 0.5 %

... coil, the following electromotive E is generated in proportion to flow speed v: Where: E－Induced electromotive force K－Meter constant B－Magnetic induction density V－Average flow ...

Process temperature: 0 °C - 40 °C
Process pressure: 0 bar - 1.96 bar

The FX Series gravity flow detectors employ a precision differential pressure transducer to detect liquid level variations in a measuring cylinder. The detectors are capable of measuring instantaneous and cumulative fuel ...

Volumetric flow rate: 0.4 l/min - 40 l/min
Process temperature: 0 °C - 180 °C
Process pressure: 20, 25, 8 bar

In parallel connected circuits flow changes might remain undetected as the flow of medium is distributed among the remaining channels. External flow meters Flow-5 ...

Volumetric flow rate: 16 m³/h - 3,200 m³/h
Process pressure: 100 Pa - 78,000,000 Pa

... and intellectualized management. It is an ideal flow metering device for domestic and foreign urban gas, Gongfu users, oil field chemical industry, industrial boilers and other departments. 1: Flowmeter ...

Volumetric flow rate: 10 l/min - 200 l/min
Process temperature: 20 °C - 110 °C
Process pressure: 5,075 psi

... pressure. This product also accepts reverse flow (without flow metering). The SMD on the other hand can and must not be subjected to reverse flow. Designed for installation in straight ...

Process temperature: -200 °C - 1,240 °C
Process pressure: 0 bar - 690 bar
Precision: 1, 0.5 %

... deltaflows high tolerance on non ideal flow profiles ensures high accuracies even under short inlet conditions. Typical applications are flow measurement of steam, the metering of perssurized air, ...

Precision: 0.35, 0.5 %

MagneW PLUS+ electromagnetic flowmeters are designed to measure every sort of liquid, including water, chemicals, slurries, and corrosive liquids. The standard model has a mirror-smooth PFA liner for excellent adhesion ...

Volumetric flow rate: 0 m³/h - 200,000 m³/h
Process temperature: -20 °C - 50 °C
Process pressure: 2,000 Pa

... measurement probe. Usage The DPT-Flow-Batt is an on-site display designed for air handling units to measure the air flow on centrifugal fans. The DPT-Flow-Batt can also be used in ...

Process temperature: 120 °C
Process pressure: 500 bar

... Model SEM-1 Electromagnetic Flow meter can perform test on the basis of two methods: flux collection method and non-collection method. There are no movable mechanical elements in the flow ...

Volumetric flow rate: 0 us gal/min - 120 us gal/min
Process pressure: 5,000 psi

Ideal flow meter for oils, grease, fuel, solvents, polyurethanes, brake fluid, Skydrol® and other non-abrasive lubricating fluids, such as in the process of measuring cylinder position in engines. Features: ...

Volumetric flow rate: 0 l/min - 15 l/min
Process temperature: -20 °C - 65 °C
Process pressure: 0 bar - 20 bar

... sensor connector. Four flow ranges are available from 2 ml/min to 15 litres per minute, accuracy is ±1% over the whole flow range. Flowmeters for Process & Control: The Titan Process ...

Volumetric flow rate: 2 l/min - 40 l/min
Process temperature: -20 °C - 90 °C
Process pressure: 10 bar

... form a Kármán vortex street in the flow. The distance between the individual vortices is constant. The frequency at which the vortices flow past a sensor depends on the flow velocity ...

Process temperature: 5 °C - 55 °C
Process pressure: 16 bar

●　Electromechanical separation： The electronic device and the water meter are completely independent； ●　Communication method: Internet of Things NB-IOT, LoRa, wired M-BUS； ●　Remote transmission: Water consumption information ...

Volumetric flow rate: 100 l/min - 20,000 l/min

... foldable and stabilising legs. The values of flow and pressure can be recorded on a smartphone using a free mobile app. The power supply is given via a lithium ultralight battery with long durability. These flowmeters ...

FLOMAT series flow meter is suitable for use in large diameter pipes or open channels as an economical solution for liquid metering. Applications include flow measurement of conductive ...

Volumetric flow rate: 1.6 m³/h - 4 m³/h
Process temperature: 0 °C - 90 °C
Process pressure: 16 bar

Static ultrasonic water meter for accurate measuring and recording for all applications of water supply. • Real data communication, open metering telegram • Long-term stability under difficult conditions • ...

... range selection input, counter status output and many more! Excelent noise immunity for reliable process control Optional “Fast Response” model for short-run batch applications Averaging function for pulsating ...

Process temperature: -20 °C - 60 °C
Process pressure: 0.25 bar - 4 bar

... companies for remote copying, monitoring, and control of industrial and commercial gas meter users, and to perform statistical analysis of gas meter gas consumption and meter status. ...

Process temperature: -25 °C - 150 °C

Volumetric flow rate: 1 l/h - 600 l/h
Process temperature: 0 °C - 105 °C
Process pressure: 0 bar - 10 bar

The 2nd generation micro flow meter with improved precision, extended measuring range, push-in fitting connections and state-of-the-art communication interfaces. Features Integrated Temperature Sensor High-Speed ...

Process temperature: -100 °F - 250 °F
Process pressure: 0.1 psi - 250 psi

... Multimeter comes complete with a shutoff, bypass, and blow down valve network mounted on a portable meter panel. The valve network panel facilitates meter zero procedure, bleed-off of air, venting of ...

The FLODEM electromagnetic flow meters are based our decades of experience. They've are highly reliable, easy to operate and very suitable for harsh conditions.