Wafer valves

DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C

The pressure plate type ball valve structure: it is composed of valve body, valve cover and ball core. The ball core is connected by the valve stem, and the axis can ...

DN: 40 mm - 600 mm

Concentric electric butterfly valve / soft seal with resilient seat/low torque design Features Soft seal butterfly valve  - Body type: wafer or lug  - Body material: Ductile ...

Electrical Wafer Butterfly Valve D971F-16C has a pressure range of 0-1.0MPa and has a medium temperature of -20°C to +120°C. It can be operated via on and off mode and has a controlling voltage of AC24V, ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

... BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. Due to the wafer ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 200 °C

... seats of double eccentric high performance valves today,butterfly valves are used from basic water applications to industrial applications and highly corrosive severe service applications    Butterfly ...

DN: 65 mm - 300 mm

Wafer Type butterfly valve with signal gearbox 2-1/2" DN65 - UL/FM Wafer Type butterfly valve with signal gearbox 3" DN80 - UL/FM Wafer Type ...

DN: 25 mm - 500 mm
Pressure: 150 psi
Temperature: -29 °C - 204 °C

The Series 20/21 resilient seated butterfly valve surpasses the high standards required in sanitary valve applications, and inherent flow characteristics and capabilities. Bray's Series 20 valve ...

DESIGN Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B - PN10 (former DIN 25011. ANS1150 on request MEDIA Liquid and pulverised media with fibre parti- cles, viscous media, drain ...

DN: 25 mm - 100 mm

The GRC Series, manufactured by Gemels, is a 2-way high pressure carbon steel ball valve that is specially designed to produce a shutoff even after abandonment. This valve works within a temperature range ...

DN: 350 mm - 1,000 mm
Pressure: 16 bar

... - Concentric butterfly valve with bonded vulcanised rubber linings Body type - Single flange wafer type Design pressure - 16 bar / 232 psi Nominal diameter - DN 350 / NPS 14 up to DN 1000 / NPS ...

Pressure: 0 bar - 16 bar

Our range of general purpose Butterfly Valves have been designed to provide a cost effective solution to your flow control and product shut-off requirements. Available in sizes from 50mm to 1000mm bore. Suitable for ...

DN: 100 mm - 600 mm
Pressure: 150 psi

... between the blade and the packing in a standard knife gate valve. ● Low-friction, acid-resistant Ni-Resist stem nut: Valves can operate with smaller actuators than standard knife gate valves.

Temperature: -20 °C - 450 °C

... Besides butterfly valve, we can also offer gate valve, ball valve, globe valve, check valve, safety valve and so on. If you have any ...

DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

Series B1 consists of wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accordance with the severe product standards and the quality management of ISO 9001. ...

DN: 40 mm - 600 mm

... precisely designed MNC Knife Edge Gate Valve at genuine rate. Our company holds specialization in manufacturing, exporting and supplying of Gate Valve in India. The salient features of our Industrial ...

DN: 40 mm - 300 mm
Pressure: 6 bar
Temperature: -10 °C - 110 °C

Wafer NP6/10/16/20* - GG25 cast iron + Epoxy body - cast iron polyamide coated butterfly - EPDMGasket - Temperature : EPDM = -10°C +110°C

DN: 3 in - 60 in
Temperature: 260 °C

Jamesbury Wafer-Sphere™ high-performance butterfly valves combine unique off-center disc, proprietary seat design and Xtreme™ sealing technology. Tight, long-lasting sealing, and yet light and low-cost ...

DN: 65 mm - 200 mm
Pressure: 20.7 bar - 41.4 bar
Temperature: 120 °C

... temperature: +120°C. • Factory installed UL listed double tamper switch for indoor and outdoor use. • Universal wafer type butterfly valve for connection to ANSI B16 Class 125, ISO 2084/Din 2501 PN16& BSEN ...

DN: 40 mm - 600 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 110 °C

High performance butterfly valve. Replaceable liner vulcanized on back-up ring. Modified ISO top Option: Alu-bronze disc Type E6720 CE - ATEX - 3D

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -30 °C - 180 °C

DESCRIPTION • 2-way wafer type ball valve with flange connection PN16 • Full bore • Body, ball and stem SS316 • Mounting flange ISO 5211 for direct mounting pneumatic or electric actuators • Seats ...

DN: 50 mm - 2,000 mm

Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate valve ...

DN: 50 mm - 300 mm

SYLAX® WAFER STYLE SERIES 149GA Body: Cast Iron Disc: 316 Stainless Steel Seat Liner: EPDM

DN: 2 in - 24 in

... iron body. Series 1100 (Split Body, Resilient Seated Butterfly Valve) Our resilient seated butterfly valve is our most commonly sold butterfly valve. This series butterfly valve ...

DN: 1 in - 120 in
Pressure: 6 bar - 16 bar

The Butterfly Valves are utilized to control or shut-off a flow, and are the favored result in larges sizes up to 4000 mm. The Butterfly valves with centric disc are the most economical types and best ...

DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -20 °C - 160 °C

Used at the same way as the Flanged valves with the advantage of have a reduced encumbrance and with the advantage to be cheaper.