... control, adapt to the changes of different part load. EVAPORATOR Evaporator built with high efficiency flooded type shell and tube heat exchanger, increases heat exchange coefficient of the evaporator ...
Qingdao Hongyu Cles Air Conditioning Co., Ltd.
Power: 23 kW - 30 kW
Maximum temperature: 0 °C - 60 °C
Simple and reliable. Plug and Play Microprocessor control. 3 speed circulating pump as STD ( evap) Sizes= 10 Refrigerant: R410 A EER up to 4,84 ESEER up to 6,68
WESPER
Power: 3.3, 3.7, 1.85, 2.25 kW
... Normal temperature cooling machine is equipped with water spraying device at the feed inlet, water tank is equipped with bubble cooling pipeline. Outside the water ...
Power: 0.9, 0.76, 0.35 kW
Maximum temperature: 0 °C - 35 °C
Flow rate: 10 l/min
... certain amount of water is injected into the water tank of the machine in advance, and the water is cooled by the cold water mechanism and the cooling ...
Maximum temperature: -30 °C - 5 °C
... applications: chemical, pharmaceutics, contact lens. RACA/C-BT are either air or water cooled. Low temperature range of the fluid between +5 and -30°C (41 to -22°F) All BT chillers ...
Power: 1.8 kW - 60 kW
Maximum temperature: 40, 50 °C
... HOFFMANN Water Coolers are renowned for their high efficiency and compact design. A pump transports the water into the evaporator for cooling. The evaporator ...
HOFFMANN APPARATE
Maximum temperature: -25 °C - 45 °C
... single-temperature process water cooling system with fully automatic built-in freecooling; it can work with ambient temperature from + 45 °C to -25 °C. SIRE is available in the water-cooled ...
Industrial Frigo S.r.l.
... knives at either end of the tunnel. > Drive at the end of the tunnel. > Cooling system completely insulated and double jacketed. > Air or water cooled, semi-hermetic, cooling ...
Rotary Cooler Rotary cooler is a cooling device which is based on conventional rotary cylinder and has a regular internal installation of cooling heat exchange tube. ...
Maximum temperature: 10 °C
It can be used to stop the cooking process and to cool a lot of products such as pasta, rice and vegetables. The cooler is provided with a Cleaning Assist and Recirculation System (CAR System) that can operate while the ...
... all cooling components minimizes the risk of water contacting installed IT equipment in the unlikely event of a leak. Allows chilled water to be connected from the top, if routing from ...
Power: 9.5 kW
... outdoors - Water splash-resistant, IPX4 compliant Cut your costs - Reduced power consumption, only one refrigerator, fan and pump. No heater needed. And much more Dual Channel Refrigerated Thermo-chiller. Air-cooled ...
SMC
Power: 2 kW - 360 kW
Maximum temperature: 0 °C - 25 °C
... Carbon dioxide (CO2) lasers, excimer lasers, ion lasers, solid-state lasers, and dye lasers all use liquid cooling to remove excess heat. Laser liquid cooling can help ...
Power: 15 kW - 360 kW
Maximum temperature: 7 °C - 35 °C
Flow rate: 5.4 m³/h - 90 m³/h
CE Certificated Description Benefits & Features •The device can cool the water temperature ranging from 7 to 35oC. •The low cooling temperature can be customized as per customer’s needs. •The ...
Maximum temperature: -40 °C - 120 °C
... damage low temperature damage high temperature start low temperature start high temprature operation low temperature operation The battery pack liquid cooler ...
Guangdong Bell Experiment Equipment Co., Ltd
Maximum temperature: -40 °C - 85 °C
... damage/start/operation The battery liquid cooler is specially used for thermal and fluid mechanics testing of liquid cooled battery packs. According to the requirements ...
Guangdong Bell Experiment Equipment Co., Ltd
Maximum temperature: -40 °C - 120 °C
... damage low temperature damage high temperature start low temperature start high temprature operation low temperature operation The battery pack liquid cooler ...
Guangdong Bell Experiment Equipment Co., Ltd
Maximum temperature: 16 °C - 38 °C
Award winning cooling option for emergency tank showers to temper the water within the tank in hot ambient climates, without the need for power! EN15154 and ANSI Z358.1-2014 standards state that water ...
... example, let's consider the cooling of iron. Depending on the cooling method employed, such as rapid cooling or slow cooling, the resulting iron will possess distinct properties. This ...
... systems. With our cooling water recoolers you can pre-select the desired temperature. This guarantees that it remains constant, which increases the service life of your tools. Our recooling systems ...
... and control water temperature within the range of 5C-35C. . Larger than 20HP model are assembled 2 sets or 4 sets of compressors, so they are able to used as separate or together to reduce the resource waste. . ...
Water cooler designed to integrate with the Dynasty 210/300 and Maxstar 280 models.
Flow rate: 180 m³/h - 12,600 m³/h
Pressure: 12 bar - 16 bar
... operated more efficiently. Water-cooled aftercoolers are intended for the separation of liquid contaminants. A significant proportion of the water load is separated ...
... stainless steel, horizontally mounted pump assures reliability Air-cooled units feature aluminum fin tube condensers with easy on/off, washable air filters Water-cooled units equipped ...
Power: 800 W
... with a door cooled by water, allowing you to host up to 45 kW of equipment without heating the air on output, and without disrupting the ventilation of the servers. The heated air coming from the servers ...
... operating criteria make our rotary coolers a wise choice for cooling powdered solids. The cooler consists of a rotating cylinder with internal fins, enabling the product to be stirred ...
Power: 37 kW
Maximum temperature: 30 °C
Flow rate: 13 m³/s
... dust and resin color in green RAL6000. The cooling water connections are designed as DIN flanges, the refrigerant circuit is hermetically sealed and with the required refrigerant fittings ...
Please specify:
Help us improve:
remaining