Water pumps

Flow: 133 l/min - 1,000 l/min

Compact and easy to handle water pump for clean water with 4-stroke gasoline engine, 1” and 1,5″ and 2” and 3” and a 2″ High Pressure model. To transfer, drain and ...

Flow: 20 m³/h
Pressure: 35 bar
Head: 60, 200 m

The powerful SP 25 DHF auger pump is suitable for conveniently and reliably placing large volumes of self-levelling floor screed. Thanks to the strong three-cylinder diesel engine with 37 kW and “Stage V” emissions, the ...

Flow: 125 l/min
Pressure: 5 bar - 11.5 bar
Fluid temperature: 0 °C - 55 °C

... oil, transmission oil, hydraulic oil, brake fluid, water etc. for pneumatic use with a compressor or manual use with the integrated hand pump select a suitable probe and suck easily ...

Flow: 0.3 l/min

... are commonly equipped with the diaphragm pumps whose water tank and main engine are connected only by spring clips. Thus, the main engine owns a weak control over the water tank, and ...

Flow: 0.95 l/min - 8.52 l/min
Pressure: 60,000, 50,000, 45,000, 30,000 psi
Power: 3.7 kW - 75 kW

... of waterjets, the pump’s three cylinders are coordinated to provide a smooth high pressure output flow. Available in 40, 30, and 20 HP options. GlobalMAX – A simplified direct drive pump specifically ...

◘ The pump body is made of gray cast iron , which has the advantages of good plasticity and high tensile strength; the pump impeller is made of PPS high-performance plastic, which has a small ...

Power: 3.7, 5.5 kW

... smooth operation. The pump can be installed to start automatically or manually by means of a control panel. 8" (203 mm) suction pipe of 10 feet (3 m) long maximum. 6" (152 mm) gate valve with insulated ...

Flow: 10 l/h - 900 l/h

... even when applying a mixture of dry and liquid coatings Options For more precise temperature control A water pump circulates water in the tank’s water ...

Manufactured in 316L Stainless Steel: The Reversible Drum Angel/ Drum Pump is a maintenance free system to recover spilled liquids, coolant, sludge, tramp oil, wastewater and other liquids ...

Flow: 7,000 l/h
Head: 7.5 m
Power: 400 W

... extraordinary pump height of 7.5 metres. An integrated check valve prevents the return flow upon switch-off. With its powerful and maintenance-free 400 W motor the submerged clear water pump ...

Flow: 0 l/min - 90 l/min
Pressure: 0 bar - 1.8 bar
Power: 390 W

The asa water pump is working to the centrifugal principle and uses a spiral housing with 1”and ¾” hose connections, magnet coupling 12V and 24V DC brushless motor. The motor and the coupling are installed ...

Power: 44.7, 56, 37 kW
Length: 1,996 mm
Width: 1,016 mm

Waterjet technology produces excellent fine-feature cut quality with low edge angularity, no heat-affected zone, a narrow kerf, and virtually dross-free cutting. It also offers the ability to process a variety of materials ...

Flow: 20 l/h - 1,000 l/h
Pressure: 0.2 bar - 8 bar

MixRite1 is a water driven proportioning injector for pumping an additive into a water line at a consistent induction rate over varying water pressure and flow rates. Especially compact ...

Flow: max 120.0 m³/h

Specification： Phase: Single Frequency: 50/60 (Hz) Rated Power: 1.3/1.5(kW) Rated Voltage: 200-240/220-275 (V) Rated Current: 7.3/8.3 (A) Max Airflow: 120/145 (m3/h) Max Vacuum:-240 /-230 (mbar) Rated Pressure:280/260 (mbar) Sound:58 ...

Pressure: 1 bar
Power: 8 W

... injections according to water temperature. Characteristics 240 x 190 x 140 mm unit: clips on and off the connection clamp as needed, Power: 230 V / 50 Hz Wattage: 8W max. Protection index: IP54 Dosing pump ...

Power: 5 kW - 6.5 kW
Output diameter: 1.5, 2, 2.5 in
Weight: 42, 46 kg

RB series of flexible shaft pumps are mini centrifugal pumps of single type; They are wi-dely used for pumping and draining in const-ruction building sites, tunnels, culverts, water ...

Flow: 0 l/min - 3.7 l/min
Pressure: 4,200 bar
Power: 37 kW

420Mpa high pressure intensifier pump for water jet cutting machine Advantage: 2, can do 220v/380v/415v 3. SIEMENS motor 4. TAIWAN FLOW intensifier 5. USA imported accumulator 6. similar to ...

Flow: 1,700 l/h - 15,000 l/h
Power: 0.5 ch - 3 ch
Weight: 5 kg - 22 kg

... ensuring greater chemical and wear resistance. The liquid ring pump achieves suction by simply filling the pump casing through one of the hose connectors. Suction is active in both directions ...

Flow: 5,200, 6,000 l/h
Pressure: 0.2, 0.6 bar
Power: 104, 210 W

Water pumps A complete heating system also requires a high-performance circulation pump. Our proven Flowtronic water pump is reliable and efficient, ...

Power: 2 ch

The new A-Series LifeStar®VS pump from Hayward Flow Control is a self-priming, energy efficient and fully rated variable speed premium pump with an innovative multi-position digital control interface ...

... quaternary diaphgram pumps mimic the human heart, which is the perfect model for the safe, reliable and efficient transfer of biologicals materials. With an operation that offers low friction, low shear and low pulsation, ...

Flow: 100, 75 m³/h
Pressure: 11, 7 bar
Power: 22, 45 kW

... EEC directives. These pumps comply with pharmaceutical regulations and standards (ASME BPE, FDA and USP) and are delivered with the comprehensive relevant documentation. The PCP pumps are suitable ...

Flow: 112 l/min

... highly aggressive liquids Viscosity up to 1000mPas Fits any 200L Drum or 1000L IBC Pump tube made of PVDF Easy disassembling for quick cleaning of the pump tubes Drum Pump ...

Flow: 17 l/min
Pressure: 3, 3.5 bar

Water pumps (hydraulically driven) The hydraulically driven water pump is optimised for the water supply of the tunnel washing brush TWB.

Power: 120 W
Length: 535 mm
Width: 308 mm

... sterility test, and the bottom is exposed from isolator and be electricity parts. Main parts: Pump device, pump head, screen, bottle holder, drain tray, speed control and footswitch. Technical feature 1. ...