Water pumps

Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m

... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...

Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m

... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive ...

Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m

... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...

Flow: 4 m³/h - 150 m³/h
Pressure: 24, 18 bar

NEMO® progressing cavity pumps in the FSIP® (Full Service in Place) design allow you to save up to 66 percent on servicing time. Available in three variants, these pumps are versatile and can be utilized ...

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

The NEMO® BY block pump, with its industrial design, is versatile and can be applied in environmental technology, the food and chemical industries, as well as in the oil & gas sector, both upstream and ...

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... ® SY progressing cavity pumps are employed in challenging applications for continuous, pressure-stable, gentle, and low-pulsation conveyance, as well as speed-proportional dosing, in almost every industry ...

Flow: 12, 30, 16, 20 m³/h
Pressure: 3.5 bar
Power: 1.1, 1.5, 1.8 kW

Tank Truck Eccentric Disc Pumps is a polyvalent heavy duty pump able to cover a wide range of applications. Depending on the construction, it can handle fuels, solvents, and waste products such oil, glycol ...

Flow: 105 l/h - 54,000 l/h
Pressure: 16, 7.5 bar
Fluid temperature: 80, 90 °C

... Peristaltic Hose pump will handle your toughest pumping needs — from abrasive and aggressive to shear-sensitive and viscous fluids. Abaque pumps currently operate in some of the most demanding environments ...

Flow: 0 l/min - 380 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining ...

Flow: 0 l/min - 35 l/min
Pressure: 0 bar - 7 bar
Head: 0 m - 70 m

Diaphragm pumps Fluid connections: 1/2" BSP Air connection: 6 mm Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 3 mm Noise level: 65 dB Max Viscosity: 15.000 cps ...

Flow: 0 l/min - 120 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining ...

Flow: 1.6 m³/h - 187 m³/h
Pressure: 250, 300, 450, 200 psi

PUMPS / POSITIVE DISPLACEMENT PUMPS The Universal 2 positive displacement pump modified - specifically designed for the pulp and paper industry. FEATURES ey advantages of the SP ...

Flow: 22 m³/h - 159 m³/h
Head: 7 m - 109 m
Length: 445 mm - 808 mm

PUMPS / CENTRIFUGAL PUMPS Designed for use in the Bio-Pharmaceutical industry, these pumps are manufactured to ASME BPE specification criteria. FEATURES All product contact components ...

Flow: 22 m³/h - 318 m³/h
Head: 6 m - 104 m

Pumps / Centrifugal Pumps Adapted from rugged, precision 200 Series design for pumping water for injection; modifications to seal area prevent leakage of contaminants into pumpage. Features Although ...

Flow: 0.35 l/min - 0.5 l/min
Pressure: 30 mbar - 350 mbar

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...

Flow: 0.01 l/min

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...

Flow: 0.2, 0.25 l/min
Pressure: 170, 180, 350 mbar
Weight: 140 g

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...

Flow: 0.1 l/min - 8 l/min
Power: 7 W
Fluid temperature: 0 °C - 40 °C

... tolerance requirements, please consult our engineer. Reasons to Buy Keyto Mini Diaphragm Liquid Pump Pure working environment Offering pure working environment for liquid ...

Flow: 0.1 l/min - 8 l/min
Power: 7 W

7121 series micro diaphragm pump is a new module that is independently developed by Keyto. Its main function is to achieve liquid aspiration and dispensing by means of reciprocating movement ...

Flow: 0.1 l/min - 8 l/min
Power: 2 W

... tolerance requirements, please consult our engineer. Reasons to Buy Keyto Mini Diaphragm Liquid Pump 7121 01 Pure working environment Offering pure working environment for liquid ...

Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m

ZUG V VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock ...

Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW

Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks

Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW

Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications

Flow: 0.5 l/h - 15 l/h
Pressure: 3 bar - 16 bar
Power: 10 W - 29 W

Simple dosing pump in newest generation The MAGDOS LB solenoid-diaphragm dosing pump is a good-value alternative for simple and continuous dosing tasks. It is especially suitable for water ...

Flow: 0.5 l/h - 15 l/h
Pressure: 3 bar - 16 bar
Power: 8 W - 25 W

... dosing of liquids in process sequences and is available in seven power ranges. Double-ball valves ensure accurate dosing. To adapt the dosing performance, the stroke frequency can be adjusted manually or via an external ...

Flow: 0.36 l/h - 15 l/h
Pressure: 16 bar
Power: 8 W - 22 W

... the stroke frequency can be adjusted manually or by an analogue input signal (0/4 – 20 mA). The dosing pump is compact and, thanks to the small mounting area, can be integrated into ...

Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve ...

Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW

STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...

Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW

PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation ...

Flow: 5,000, 4,500 m³/h
Head: 210, 318 m
Power: 900, 1,200 kW

... systems, from recirculation to desalination, for HVAC, water supply, irrigation systems, water treatment systems, process systems, desalination plants, firefighting systems, and in the maritime and offshore ...

Flow: 0.24 l/min - 8.2 l/min
Pressure: 15.5 bar - 517 bar
Power: 0.33 ch

... Single air head • Drive pressure 25 to 125 psi (1.8 to 9 bar) • Pressures to 25000 psi (1724 bar) • All Hydraulic fluids, water (plain or DI), solvents, mild chemicals, liquefied gases

Flow: 0.6 l/min - 6.55 l/min
Pressure: 48 bar - 517 bar
Power: 0.75 ch

Key Features • One model available in 9 ratios • Output pressures to 15000 psi (1034 bar) • Flows to 1.5 gpm (5.7 l/min) • Choice of wetted materials • Single air head • Drive pressure 3 psi to 100 psi (.2 to 7 bar)

Flow: 0.15 l/min - 13.1 l/min
Pressure: 28 bar - 1,103 bar
Power: 2 ch

... pressure 3 to 100 psi (.2 to 7 bar) When using high pressure ratio pumps the reliability of the XH models (-452 through -1373) will be improved with an air driven supercharge pump, not only to simplify ...

Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm

... pressurizing oil, water or other fluids The MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x ...

Flow: 7.6, 4.3, 2.6, 4.1, 7.1 l/min
Pressure: 500 bar - 4,136 bar
Power: 11, 75, 37, 22, 30 kW

... Series is a configurable designed water jet pump that can be custom built based on a variety of options to meet your cutting solution requirements. From the basic model to the fully loaded, the result ...

Pressure: 3,800 bar

... which do not require a maximum pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump ...

Pressure: 3,800 bar

... product life The NEOLINE pump has been developed with the aim of creating a robust, easy to operate pump. It is driven by a 40 hp (29 kW) three-phase motor which is equipped with vibration isolation pads ...

Flow: 0 us gal/min - 200 us gal/min
Pressure: 0 psi - 225 psi
Fluid temperature: 14 °F - 350 °F

... in diameter • Pressures to 2,100 psi; capacities from .02 to 450 gpm Typical Applications • moyno l frame pumps • High-pressure water • Pastes & gels • Food, wastes & by-products • Chemical ...

Flow: 0 l/h - 13,000 l/h
Pressure: 0 bar - 10 bar
Fluid temperature: 0 °C - 80 °C

... combined with the latest peristaltic hose technology results in a heavy-duty pump for the most demanding applications. The EZstrip hose pump is a heavy-duty peristaltic pump with extra-large ...

Flow: 0 us gal/min - 2,200 us gal/min
Pressure: 0 psi - 5 psi
Power: 1.5 kW - 4 kW

... against damage and overloads Typical Applications • Tanker reception • Pump protection • Fat/sludge conditioning • Abrasive sludge maceration • Screenings in waste water

Flow: 0 l/h - 23 l/h
Pressure: 8, 5 bar

... Dura 5 peristaltic pump for high pressure low volume. Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by ...

Flow: 0 l/h - 39 l/h
Pressure: 5, 8 bar

... 7 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...

Flow: 0 l/h - 222 l/h
Pressure: 6, 12 bar

... 10 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...

Flow: max 560.0 m³/h
Pressure: 0 bar - 12 bar

Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...

Flow: 0 m³/h - 150 m³/h
Pressure: 0 bar - 48 bar

Pumps of the WANGEN KL-RS series are hopper silo pumps for conveying and dosing dewatered sewage sludge with a high-solids content (DS) of 15% to 45%. These features make silo discharge pumps ...

Flow: 0.5 l/h - 4,000 l/h
Pressure: 16 bar

... Application The WANGEN KB22S is widely used in a variety of different areas, for example in the waste water treatment plants, as conveying and dosing pump. dosing conveying media

Flow: 0 m³/h - 960 m³/h
Pressure: 9.81 bar
Head: 0 m - 80 m

... Applications: 1. Heating and cooling water circulation. 2. Broad range of industrial applications. 3. Open loop and close loop water circuit systems. 4. Water supply and pressure ...

Flow: 0 m³/h - 960 m³/h
Pressure: 9.8 bar
Head: 0 m - 80 m

... Applications: 1. Heating and cooling water circulation. 2. Broad range of industrial applications. 3. Open loop and close loop water circuit systems. 4. Water supply and pressure ...

Flow: 0 m³/h - 87 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m

... priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel material for better corrosion-resistant . Applications: ...

Flow: 0 m³/h - 20 m³/h
Head: max 15.0 m
Input diameter: max 80.0 mm

Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for ...

Flow: 0 m³/h - 20 m³/h
Head: 0 m - 15 m
Input diameter: 80 mm

Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for ...

Flow: 0 m³/h - 30 m³/h
Head: max 15.0 m
Input diameter: max 100.0 mm

Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for solid ...

Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m

... electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating pressures in closed circuit systems. Operation ...

Flow: 5 l/min - 110 l/min
Pressure: 1 bar - 10 bar
Head: 0 m - 100 m

Regenerative turbine electric pumps Hydraulic Performace Stainless steel mechanical seal electric surface pumps with peripheral impeller, ideal for increasing or maintaining circulating pressures at ...

Flow: 5 l/min - 60 l/min
Pressure: 1 bar - 10 bar
Head: 1 m - 120 m

... use with oils, clear and clean liquids without suspended parts or abrasive parts and dilutions inert respect to the pump materials. Fluid use temperatures up to 90 ° for standard versions and 180 ° C ...

Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...

Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...

Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW