Water pumps

Flow: 300 m³/h

... pumped. Our peristaltic pumps are ideally designed to efficiently pump media with a viscosity of up to 20,000 mPas, 25% dry matter content as well as particles with a size of up to 40% ...

Flow: 12 l/min - 60 l/min
Head: 8.5 m

... Container: 200 l drums, Small containers, Hobbocks Product attributes ► Connection motor and pump via quick-action coupling ► Small outer tube diameter ► Holding hook for hand ...

Flow: 17 l/min - 47 l/min
Head: 6.8 m

The small drum pump JUNIORFLUX F 310 with fixed commutator motor and mechanical seal is especially suitable for pumping comparatively small quantities out of containers such as canisters ...

Flow: 200 l/min
Pressure: 1 bar - 8 bar

1” non-metallic diaphragm pump The ARO nonmetallic 1” PD10P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It ...

Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar

1”1/2 non-metallic diaphragm pump The ARO nonmetallic 1”1/2 PD15P-XXS-XXX air operated diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...

Flow: 0 l/min - 697 l/min
Pressure: 1 bar - 8 bar

2” non-metallic diaphragm pump The ARO nonmetallic 2” PD20P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It ...

Flow: 2.4 l/h - 30.7 l/h

... dosing pump MEMDOS LB The MEMDOS LB solenoid-driven diaphragm dosing pump is the ideal solution for applications where the pump needs to be integrated into control systems or control ...

Flow: 0 l/min - 65 l/min
Head: 0 m - 12 m
Fluid temperature: 50 °C

Battery pump set - Universal The versatile helper for your chemical applications With the "Universal" B2 Battery pump set, you have a flexible and powerful partner for dispensing liquid ...

Flow: 100 l/min
Head: 12 m
Fluid temperature: 50 °C

Canister - Pump set 20/30 L Canister pump tubes The new battery-powered canister pump offers a clean and safe solution for emptying canisters quickly. With a replaceable battery and ...

... wall. The reliable metering pump is versatile and robust. What makes the beta/ X so special is its regulated drive. This enables continuous metering and a wide adjustment range. Thanks to the wide adjustment range, ...

Flow: 2.3 l/h - 45 l/h
Pressure: 2 bar - 25 bar
Power: 30, 25 W

The new solenoid-driven metering pump gamma/ X is user-friendly and has a long service life, just like its predecessor. An ingenious solenoid control measures the pending back pressure and protects the system from overload. ...

Flow: 7.5 l/h - 78.5 l/h
Pressure: 2 bar - 25 bar
Power: 78 W

The new solenoid-driven metering pump gamma/ XL extends the capacity range of the proven gamma/ X to 80 l/h. In addition to the familiar relays and bus interfaces, the gamma/ XL provides a socket with 3 more configurable ...

Flow: 8 l/s - 4,500 l/s
Power: 500 kW

... WAMGROUP has supplied more than 1,500 Archimedean Water Screw Pumps all over the world reaching diameters of up to four metres. in 1978 WAMGROUP started manufacturing PA-type Archimedean Water ...

Bosch Pump module PM - For the extraction of the feed water/condensate - Consumes less power, more convenient to operate - Speed-controlled version for increased flue gas heat exchanger efficiency - ...

Flow: 0 us gal/min - 200 us gal/min
Pressure: 0 psi - 225 psi
Fluid temperature: 14 °F - 350 °F

... in diameter • Pressures to 2,100 psi; capacities from .02 to 450 gpm Typical Applications • moyno l frame pumps • High-pressure water • Pastes & gels • Food, wastes & by-products • Chemical ...

Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 12 bar
Fluid temperature: -10 °C - 100 °C

... EZstrip Transfer Pump timeline: 1996 – First sale of a Moyno maintain-in-place pump in the US 1997 – Moyno maintain-in-place pump is granted its first patent 2009 – First sale ...

Flow: 0 us gal/min - 2,200 us gal/min
Pressure: 0 psi - 5 psi
Power: 1.5 kW - 4 kW

... against damage and overloads Typical Applications • Tanker reception • Pump protection • Fat/sludge conditioning • Abrasive sludge maceration • Screenings in waste water

Flow: 1,000 l/h
Pressure: 0.85 bar
Power: 80 W

For reliable and efficient support of different thermal circuits: The Bosch coolant pumps PAD and PCE are designed with decades of experience in thermal, liquid and energy circuits. Due to their robustness ...

Flow: 1,000 l/h
Pressure: 0.9 bar
Fluid temperature: -40 °C - 85 °C

For demand-based coolant flow: The second generation of the Bosch coolant pump PCE2.0 is characterized by its high efficiency, compact design and low weight. It excels with an increased power density ...

Flow: 1,200 l/h
Pressure: 0.6 bar
Power: 60 W

For reliable and efficient support of different thermal circuits: The Bosch coolant pumps PAD and PCE are designed with decades of experience in thermal, liquid and energy circuits. Due to their robustness ...

Flow: 4,000 m³/h
Head: 0 m - 200 m
Fluid temperature: 80 °C

... automatically selected to match specific pump duty WRAS and NSF coatings suitable for potable water available Designed for both 50Hz and 60Hz markets Clockwise and anti-clockwise rotation available British ...

Flow: 20,000 m³/h
Head: 0 m - 300 m
Fluid temperature: 80 °C

The ClydeUnion Pumps Uniglide range consists of both configured and engineered to order axially split double suction pumps. Applications Desalination Water treatment, supply and ...

Flow: 2,500 m³/h
Fluid temperature: 80 °C

The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...

Flow: 0 m³/h - 250 m³/h
Pressure: 30 bar
Head: 65 m

... circulation • Fresh water circulation • Refrigeration • HVAC • Hydrophore pump • Cooling water The pump can be equipped with an air-driven or electrically driven ...

Flow: 0.2 m³/h - 192 m³/h
Fluid temperature: -20 °C - 140 °C

... Mulitstage Centrifugal Pumps The art of transporting water is finding the right solution, with maximum efficiency, for each situation. The DPV series of vertical, multistage, centrifugal pumps ...

Flow: 120, 100 m³/h
Pressure: 30 bar
Head: 65 m

... centrifugal pump designed for high media temperatures for boiler water application and district heating applications up to 180°C. Concept Features: • Duplex stainless steel shaft. • Closed impeller ...

Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Flow: 180 l/s
Pressure: 16 bar
Head: 100 m

... without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge with a high content of fibers - All viscous media - Suspensions with ...

Flow: 0 l/s - 8,300 l/s
Pressure: 6, 4 bar
Head: 0 m - 10 m

The typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs. Applications Crystallisation plants Vaporisation ...

Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW

... Applications Types of fluid - - Industry water coolants cooling/cutting oils - Kinematic viscosity - - ...25 mm²/s (25 cSt) - Pumping temperature - - 0...60° C Construction Pump body ...

Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW

Immersion Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion ...

Flow: 20 l/min
Head: 15 m - 220 m
Power: 0.48 kW - 2.2 kW

Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at ...

Flow: 0.00073 m³/h - 0.00432 m³/h
Pressure: 150 bar
Fluid temperature: -20 °C - 300 °C

... It has been specially developed for use with aggressive and corrosive chemicals The pump is suitable for both vacuum and high-pressure applications. The CHEM.pump impresses with its ...

Flow: 0 l/min - 8.576 l/min
Pressure: 200 bar - 700 bar
Fluid temperature: -30 °C - 150 °C

Radial piston pumps The TR / TRG radial piston pump was designed for the high pressure range up to 700 bar and for uncritical, clear media. The pump is available in different versions. Moreover, ...

Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...

Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW

... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to ...

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing ...

Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW

HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...

Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW

HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...

Flow: 0 l/min - 380 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining ...

Flow: 0 l/min - 35 l/min
Pressure: 0 bar - 7 bar
Head: 0 m - 70 m

Diaphragm pumps Fluid connections: 1/2" BSP Air connection: 6 mm Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 3 mm Noise level: 65 dB Max Viscosity: 15.000 cps ...

Flow: 0 l/min - 120 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining ...

Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m

High efficiency IE3 electric pump VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil ...

Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW

High efficiency IE3 electric pump Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks

Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW

Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications

Flow: 20, 40, 2 m³/h
Head: 180, 195, 203 m
Power: 80 W - 1,500 W

... sunset; BLDC Solar Water Pump System Overview This system will transform the solar energy from the sun to drive small power pumps and pump water ...

Flow: 0 m³/h - 3.9 m³/h
Power: 0.55, 0.75, 1.1, 1.5 kW
Fluid temperature: 35 °C

... AC Solar Deep Well Submersible Pump Overview 1. Operating conditions Maximum fluid temperature up to +35°C Maximum sand content: 0.25% Minimum well diameter: 3" 2. Motor and Pump Rewindable ...

Flow: 0 m³/h - 27 m³/h
Power: 0.55 kW - 4 kW
Fluid temperature: 35 °C

... AC Solar Deep Well Submersible Pump Overview 1. Operating conditions Maximum fluid temperature up to +35°C Maximum sand content: 0.25% Minimum well diameter: 4" 2. Motor and ...