Y fittings

Diameter: 15, 18, 22 mm

NiroSan Double wall plate with female end and female thread

Diameter: 2.5 in - 6 in
Operating pressure: 10 bar

- PVC-U = Unplasticised Polyvinylchloride Manufacture - Injection moulded

Diameter: 1.6 mm - 12.7 mm
Operating pressure: 125 psi

Barbs molded without parting line，100% Virgin Materials，100% Quality Inspection，Application Range: 125 PSI, w/o clamps，Standard, Reducing, & Enlarging，Leak resistant "Sharp Barb" design Applications： Using for peristaltic pump head Product ...

Diameter: 0.125, 0.375, 0.25, 0.5 in

Maintenance of equipment in the factory and the installation process,often need different types and pipe joints,pipe joints made from brass,nickel-plated. Thread meets ISO 7 (BSPT), ISO 228 (BSPP), and SAE AS 71051:1999 (NPT)

The grommet hose connectors of the E10 series are mainly used for thick-walled hoses or where there are no push-in fittings for the hoses. The hoses are fastened here by means of hose clamps. Our E10 series is available ...

Diameter: 6 mm - 150 mm
Operating pressure: 25 bar

Black Iron Fittings Flat Seat Union Maximum Temperature: - 200°C (392°F) Tensile Strength: - 350MPA Suitable Applications: - Water, Oil, Gas, Petro-Chemical Product Description The ...

Diameter: 0.125, 0.5, 0.25, 0.375 in
Operating pressure: 60 bar

Distributor, 2-fold, G 1/8 interior outlets 2 x G 1/8 IT, nickel-plated brass, Max. Temp. 150 °C Distributors, 2 outlets, nickel-plated brass

... Stainless steel Product range: ·Socket welding fittings ·Srewed fittings ·Butt-welding fittings Product size: ·DN 20 –DN 800 mm seamless fittings ...

Welding Tee , Clamp U type Tee , Clamp Y type Tee, Clamp Tee etc.

Operating pressure: 0 psi - 150 psi

Half Metal Plastic Fittings Half copper straight two-way three-way pneumatic element quick pipe fittings Pneumatic fittings are used in pneumatic piping. The tube fittings ...

Diameter: 105 mm - 300 mm

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 16 bar

Push-in fittings - 2800 series Areas of application : compressed air, vacuum Technical features - straight fitting’s body in nickel plated brass - others fittings in acetalic ...

Diameter: 0.5 in - 24 in

Specifications: Type: Soc x Soc x Soc Material: UPVC, CPVC Size:1/2"~24" Standard: ANSI SCH80

Y connector made to not collapse and provide constant airflow during operation to all cushions in system. Made from PVC and 3" camlock fittings.

... ASSEMBLING INSTRUCTIONS Put the nut and the compression ring on the outside of the pipe and then insert the pipe into the fitting until it is totally against the bottom of socket, the o-ring must remain in the original ...

material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...

Diameter: 3.2 mm

Y Tube Fitting with 500 Series Barbs, 1/8" (3.2 mm) ID Tubing, Animal-free Natural Polypropylene

Diameter: 3 mm - 22 mm
Operating pressure: 0 bar - 20 bar

... threaded connectors short, male - Basic threaded connectors long, male - Bulkhead connectors - Elbow connectors - T-connectors - Y-connectors - Reducer - Single ring - Dual ring - Elbow threaded connection, rotatable ...

Diameter: 3.4 mm - 9 mm

Made from polyethylene (Hd-PE) Colour: natural Excellent chemical resistance Suitable for both plastic and rubber hoses Applicable in professional and domestic environments Available in 3 different models

Colasit round ventilation components made of plastic for corrosive exhaust air and gases Setting the standard for plastic construction and short delivery times Optimum ventilation solutions Thanks to consultation, planning and professional ...

Diameter: 0.5 in - 3 in

Sealing fittings and three pieces union Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts) Classification: Group II ...