Thermal mass flow meter Sensyflow FMT500-IG
for gasfor airDN50 - 2"

thermal mass flow meter
thermal mass flow meter
thermal mass flow meter
thermal mass flow meter
thermal mass flow meter
thermal mass flow meter
thermal mass flow meter
thermal mass flow meter
thermal mass flow meter
Add to favorites
Compare this product
 

Characteristics

Technology
thermal mass
Fluid
for gas, for air
Pipe diameter
DN50 - 2", DN25 - 1", DN100 - 4", DN80 - 3", DN65 - 2"1/2, DN125 - 5", DN60 - 2"1/4, DN90 - 3"1/2, DN200 - 8", DN150 - 6", DN175 - 7"
Installation
in-line
Communication
4-20 mA, PROFIBUS, HART
Protection level
ATEX
Other characteristics
digital, with LCD display

Description

Sensyflow FMT500-IG is a digital mass flowmeter for air, gases and gas mixtures in process applications. The system is supplied with LCD display, integrated gas temperature measurement and totalizer functions. Sensyflow FMT500-IG is a thermal mass flowmeter for gases. The measuring principle (hot-film anemometer) allows the direct determination of mass flow and gas temperature. Taking the standard density of the gases into consideration, the standard volume flow rate can be displayed without additional pressure and temperature compensation. The integral mount design of the Sensyflow FMT500-IG metering system comprises a transmitter, flowmeter sensor and a pipe component. In the remote mount design the flowmeter sensor and the transmitter are connected via cable. The pipe component is available in various designs. It is also possible to install the flowmeter sensor directly in square ducts or pipes with any diameter via a weld-on adapter. Wide measuring range up to 1:150 – Factory calibration with optional DAkkS / ILAC certificate – Process gas calibration with clean gases and gas mixtures High measuring accuracy of < 1 % of rate Quick response time of < 0.5 s Negligible pressure loss Defined and reproductible mounting position – Pipe components for DN 25 to 200 (1 to 8 in.) – Weld-on adapters for larger diameters and rectangular ducts Output signal – 4 to 20 mA, HART – PROFIBUS DPV 1 – Diagnostic and alarm functions ATEX / GOST for zone 0, 1 and 21, FM, CSA, DVGW

Catalogs

No catalogs are available for this product.

See all of ABB Measurement & Analytics‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.