Serial communication card ANDROID-232

-Android USB 2.0 Full-Speed Host to industry standard RS-232 DB9M serial port -Supports UART interface with RX, TX, RTS and CTS -RX buffer size 5512 bytes; TX buffer size 256 bytes -Supports baud rates up to 460.8kbps, 921.6kbps optional -Use with any Android platform supporting Android Open Accessory Mode (typically 3.1 or above) -±15kV ESD protection on USB data lines and all RS-232 signals -Status and fault LEDs including external power, charging status, and USB status -Supports USB charging for Android devices -Type A USB connector features industrial strength high retention design -Latching +5V external power input connector with external regulated power supply -Industrial operating temperature (-40°C to +85°C) standard -A hard line wired connection eliminates security concerns associated with Wi-Fi and other radio frequency solutions -RoHS Compliant FACTORY OPTIONS -RJ12 female for RS-232, including GPS signals on RJ12 and J5 connector -RJ45 connector with Cisco pinout -RJ12 connector -Baud rates up to 921.6kbps The ANDROID-232 is USB serial interface board which allows users the ability to control legacy RS-232 devices directly from modern Android devices. The ANDROID-232 uses the Android Open Accessory protocol to convince an Android device that its onboard USB port (normally limited to USB “slave” or “OTG” modes) is actually an RS-232 port. This two way data port allows external hardware to control the Android unit or for the Android unit to control external hardware.