High-temperature black body calibration source Fastcal 2700BB

for pyrometers

FastCAL 3000 is a high temperature blackbody source with a capacity to produce high temperature using high emissivity emitter(graphite tube) and at the same time stabilize at the required temperature within a few minutes. It is mainly used to calibrate non-contact temperature sensors. Step change in temperature is achievable within seconds. The graphite tube has an emitter diameter of 25mm (1.00″) and an emissivity of +0.99. Target temperature is sensed by a non contact temperature sensor/Pyrometer which gives a feedback to PID controller to regulate the cavity temperature precisely to the desired set points. Remote set point is achieved via RS-232 C communication port. All safety features to protect equipment and operator are easily accessible. Model : Fastcal 3000 Temperature Resolution : 0.1°C Purge Gas : Argon gas flow with 7-10 LPM respective Controlling Sensor : Pyrometer Method of Control : PID controller Eurotherm make 3504 (Option - HMI & Data Logging) Emissivity : 0.99 Heating Time : Approx 5 Minute from 500 to 2700°C Ambient Temperature : 10°C to 50°C Power Requirement : 440V,Single Phase AC 50/60 Hz 50 KW Dimensions : 1700mm(H) x 900mm(W) x 1200mm(D) Cavity : Graphite Dual cavity blackbody, one cavity is control and one cavity for measurement Heating Aperture : 25mm Weight : 300 Kg Safety Interlock Features System will switch off in case of : • Water flow failure • Increase in water temperature • Argon gas flow failure • Over current