Stainless steel gas spring GZ-15

for industrial usefor medical equipmenttraction

Very low progression rate Valve Technology Stroke 20 mm to 150 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 mm to 40 mm as well as forces from 40 N to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve. Gas traction springs from ACE are used in industrial applications, especially in mechanical engineering and in medical technology as well as in the electronics and furniture industries. Stroke 20 mm to 150 mm Piston rod diameter Ø 4 mm Progression Approx. 12 % to 22 % Lifetime Approx. 2,000 m Operating temperature range -20 °C to +80 °C Material Outer body, End fittings: zinc plated steel; Piston rod: stainless steel (1.4301/1.4305, AISI 304/303) Operating fluid nitrogen gas Mounting with piston rod upwards End position damping length Without damping. For end position damping use damping material (e.g. TUBUS or SLAB). Positive stop External positive stop at the end of stroke provided by the customer.