Pneumatic clamping element R
machiningshaftcompact

pneumatic clamping element
pneumatic clamping element
pneumatic clamping element
Add to favorites
Compare this product
 

Characteristics

Type
pneumatic
Applications
machining, shaft
Other characteristics
compact, flange
Clamping force

Min.: 42 N

Max.: 4,680 N

Description

Strong holding force on the shaft Pneumatic Rotational Clamping Direct clamping on the shaft: Rotation motions are prevented by the ACE models LOCKED R. Their clamping elements are available for shaft diameters of 50 mm to 340 mm and ensure maximum holding forces. The clamp is immediately applied by the diaphragm and spring-plate system when pressure is lost. Pneumatic quick-switch valves reduce the reaction times. The costs are low in comparison with hydraulic clamping systems. Their performance is, however, achieved or exceeded despite the compact and easy to assemble design. Special versions for YRT bearings as well as active clamping elements are additionally available. ACE recommends the use of the optional shaft flange as wear protection. The clamping force can be increased considerably by the use of the additional air function. Models from the LOCKED R product family are used in mechanical engineering and customised machine tools. Shaft Diameter Ø 50 mm to Ø 340 mm Clamping cycles 1,000,000 Mounting in any position Material Outer body: hardened fine-grain structural steel, inner bore ground Pneumatic medium dried, filtered air Operating temperature range 10 °C to 45 °C
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.