Incremental signal converter MSX-RDC-17

digital

The resolver-to-digital converter MSX-RDC-17 is a device for supplying and acquiring a resolver. It converts the position value given by the resolver into a digital incremental output signal. The resolution of the incremental encoder output can be defined using the switch on the front side of the MSX-RDC-17. The MSX-RDC-17 is a device for supplying and acquiring a resolver. It converts the position value given by the resolver into a digital incremental output signal. The resolution of the incremental encoder output can be defined using the switch on the front side of the MSX-RDC-17. Features Power supply Nominal voltage: 5 V Resolver output/input Frequency: 10 kHz Incremental encoder output Output signals: incremental A+, A-, B+, B-, Index+, Index- Output type: differential, RS422 Resolution: 10-/12-/14-/16-bit Power supply connector For the power supply of the MSX-RDC-17, a 4-pin screw terminal is fixed on the bottom side of the housing. The Ground and the supply pins are connected internally with each other. For less current flow over the terminals, please connect all four pins externally with each other! Resolver connector The resolver has to be connected to the 9-pin D-Sub female connector on the front side of the MSX-RDC-17. Switch On the front side of the MSX-RDC-17, a switch panel with three switches is installed. Switches 1 and 2 are used for setting the resolution of the incremental encoder output. Switch 3 allows you to reset the MSX-RDC-17. To do a reset, you have to switch on switch 3 for a short time and then switch it off again.