Pneumatic gripper AGW-375-1

paralleldouble-acting

Features & Benefits *Ultra high gripping force to weight ratio due to four opposing independent pistons that direct power to the jaws. *True parallel jaw motion for easy tooling. *Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance. *Piston seals are quad-ring type for long service life. *Large jaw support shafts are guided through the full width of the main body. *Proximity switches are available to monitor open and closed position of the jaws. *Series AGW-375-1 is fully field repairable for cost savings and minimum down time. *Non-synchronous versions allow the gripper's jaws to comply to the part's centerline versus the gripper's centerline. Product Specifications Close: 0.3 sec [0.3 sec] Open: 0.3 sec [0.3 sec] Pressure Range: Low/High 20-120 PSI [1.7-8 BAR] Temperature Range: Low/High -20°/180°F [-28°/80°C] Side Play: ± 0.001 [.03 mm] Repeatability from Center: ± 0.002 [.06 mm] Loading Capacity: Static – Dynamic Max Tensile T 100 lbs 20 lbs [445 N] [89 N] Max Compressive C 100 lbs 20 lbs [445 N] [89 N] Max Moment Mx 175 in/lb 35 in/lb [18.7 Nm] [4 Nm] Max Moment My 250 in/lb 50 in/lb [28 Nm] [5.6Nm] Max Moment Mz 175 in/lb 35 in/lb [19.7 Nm] [4 Nm] Material: High Strength,Hard Coated aluminum bronze alloys, Steel Weight: 1.3 lbs [6 kg] Piston Diameter: .625 in x 4 [15.8 mm]