NC pressure switch DS15-03

The pressure switch closes or opens an electrical contact when the desired pressure is reached. If it falls below, the contact will be reset. Media: compressed air, non-corrosive gases or liquids Overpressure: see chart for max. static pressure, dynamic pressures are 50% lower Switch_contact: NO contact, optionally NC contact Contact_load: 2 A at 42 V DC, Electrical_connector: screw terminal, spade terminal 6.3 x 0.8 mm, optionally also for DS15/16 Hysteresis: 5...20% Life_cycle: 106 switching cycles at < 50 bar Switching_frequency: max. 200 cycles/min Vibration_resistance: 10 g at 5...200 Hz Shock_resistance: 30 g Certifications: CSA-certified and UL-listed Mounting_position: any Body: brass Elastomer: NBR/Buna-N, optionally EPDM or FKM