1、Direct drive (acting) and normally closed type 2/2 way solenoid valve can quickly and sensitively change the direction
2、The structure is delicate and compact
3、The valve body is made of brass, and the heat resistance classification of coil is B. The seals are made of fluorine rubber (VITON) which is suitable for several kinds of working medium
2V130 and 250 series
1、The 2/2 way diaphragm piloted solenoid valve has low energy consumption and large flow volume
2、The starting pressure is low and operation differential pressure is<0.05MPa
3、The valve body is made of brass, and the heat resistance classification of coil is B step. The seals are made of NBR.
Installation&Usage
1. Before installing, be sure the valve hasn't been damaged via transportation.
2. The coil must be pure vertical, the inlet and outlet on body must be horizontal. it's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3. Please notice whether the installation condition accords with technical requirements (such as “voltage”,“actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4. Take measure to avoid vibration and frozen.
5. Before using the fittings and tubes make sure they are clean. When connecting tofittings, be sure the PTFE Thread Seal Tape is used correctly.
6. To keep the dust away, Default paragraph font;Never forget to install dirt-proof boot in air intake and outlet during dismounting.