Polyester putty 2080 series

two-componentfor auto bodyrepair

AKEMI® Finishing Filler bright white is a 2-component filler based on unsaturated polyester resins dissolved in styrene. The product is distinguished by the following qualities: - - very good drawing properties due to creamy consistency - - high filling and non-sag properties - - levelling of slightly scratches and uneven surfaces due to especially fine structure - - fast hardening (10-15 minutes) - - facile grindability and high abrasive properties - - very good adhesion on metal (iron, steel, aluminum), wood, stone and various plastics (e.g. rigid PVC, polyester) also in case of higher temperatures (up to 100°C) - - resistant to water, petrol, mineral oils, diluted lye and acids AKEMI® Finishing Filler bright white is used in industry, trade and hobby for levelling of dents or bruises as well as scratches or shrink holes on car bodies, machinery parts, boats and caravans. 1. - The surface to be treated must be free of rust and dust, dry and slightly roughened. All prior coats not hardened and thermoplastic acrylic lacquers must be removed. 2. - Add 1 to 4 g of red hardener paste to 100 g of filler (4 to 5 cm of paste pressed out of the screw tube correspond to 1 g). 3. - Both components are mixed until a homogeneous shade of colour is achieved. The mixture can be worked for about 2 to 8 minutes. 4. - After 15 to 30 minutes the hardened filler can be worked (ground, drilled, milled). 5. - The hardening process is accelerated by heat and delayed by cold. 6. - The filled surface can be worked over with all fillers and lacquers which are commercially available. 7. - Tools can be cleaned with AKEMI® Nitro-Dilution.