Polyester putty 20701

two-componentfor auto bodyfor plastics

AKEMI® Polyester Spray Filler is a 2 component spray filler based on unsaturated polyester resins dissolved in styrene. The product is distinguished by the following qualities: - - extremely high filling properties and very good non-sag properties - - fast hardening in case of higher temperatures (60°C, infrared) - - facile grindability (dry and wet) and high abrasive properties - - very good adhesion on metal (iron, steel, aluminum), wood, stone and various plastics (e.g. rigid PVC, polyester) also in case of higher temperatures (up to 100°C) - - resistant to water, petrol, mineral oils, diluted lye and acids AKEMI® Polyester Spray Filler is mainly used in body shops, commercial vehicle construction or in the engineering industry as well as in wood processing industry for levelling of small dents, furrows, scratches or grinding traces on large areas. 1. - The surface to be treated must be free of rust and dust, dry and slightly roughened. All prior coats not hardened and thermoplastic acrylic lacquers must be removed. 2. - Stir contents of the can well. 3. - Viscosity can be reduced by adding up to 5 % of AKEMI Dilution P. 4. - Add 2 to 4 g of Polyester Spray Filler hardener to 100 g of Polyester Spray Filler. The scale on the hardener tube corresponds to a hardener proportion of 3 %. 5. - Both components are mixed well. The mixture can be worked for about 20 to 30 minutes. 6. - The mixture is applied with a spray gun (spray nozzle: 2 to 3 mm, spray gun pressure: 2 to 3 bar). 7. - Once hardened, the spray filler can be grind after 20 to 30 minutes (60°C), after 2 to 3 hours wet (20°C) and after 3 to 4 hours dry (20°C).