Profile extrusion line filler and cutting unit

Made-to-measure design and dimensioning of robust and universally applicable haul-off belts according to the respective individual packing requirements (length) of the end product, with downstream separating and cutting device. Design and implementation of the haul-off belts according to customer-specific quality and requirement specifications for packaging of the end product. The respective haul-off belt transports the end product to the separating device. The cut length is defined in proportion to the cutting frequency to the processing speed of the extrusion line. Downstream cutting devices can be integrated as movable units stationary or flexibly into the processing line. Haul-off belt versions with cutting device are appropriate for all packaging lengths of plastic and rubber extrudates, no matter if technical profile or tube. Upon request it is possible to consider the engineering for other fields of application of flat, profiled materials of natural strength within a feasibility analysis. The most frequent fields of application of cutting devices can be found in strand granulation, small tube manufacturing, tube manufacturing and granulation. Other fields of application possible upon request Cutting device as granulator for manufacturing plastic granulates Cutting device as revolving single-edged knife for tube separation in combination with tube and full unwinding or similar. Cutting device as multi-edged knife plate for manufacturing short, defined tube or full cuts of the most different diameters