Protection box 06P2X100

Used in low voltage electricity distribution networks, they allow for sectioning and facilitate interruption of the supply of electricity to facilities. Made of polyester reinforced with grey self-extinguishing fibreglass, RAL 7035. End caps in plastified PVC gray RAL 7035. EN 61439-2 DMA C62-810/N IP45 IK10 Integrated or surface assembly. Prepared to EDP* lock with cylindrical cannon type RONIS (06P2x100). Inputs and outputs with adjustable conical caps. Frequency: 50/60Hz Nominal voltage: 400V, 50Hz Transitory overvoltage (Uimp): 6kV Overvoltage category: CAT IV Insulation voltage: 600V Nominal current: 100A Short-circuit current: 25kA Neutral regime: TN Diversity factor (RDF): 1 CEM environment: A Pollution level: 3 Insulation category: Category II Internal separation method: Method 1 Connection type: FF Fixed installation outside up to 2000m altitude. *EDP-Energias de Portugal For integrated or surface assembly, after construction of assembly surfaces. 06P2X100 This product was developed for the introduction of up to 3x200 A building power supply cables. Protection and/or cut-off systems may be installed inside. The maximum weight of equipment in the interior must not exceed 250 kg/m2 and no heavy item may be assembled on the door.