Metalized polypropylene film capacitor CBB61

encapsulatedplasticfor electric motors

* Square plastic case * Flatten core of segment safety metalized PP film through heating pressing * Epoxy resin filling *Class A: 30,000 h (as description of IEC60252) *Class B: 10,000 h(as description of IEC60252) or 60,000 h(as description of EIA456) *Class C: 3,000 h(as description of IEC60252) *Class A: 30,000 h (as description of IEC60252) *Class B: 10,000 h(as description of IEC60252) or 60,000 h(as description of EIA456) *Class C: 3,000 h(as description of IEC60252) 1. Scope The capacitors are made of metallized polypropylene film and filled with flame retardant epoxy resin in a square plastic case (match-box) and leaded with cable or quick connecting terminals. It is suitable for starting and running of AC single-phase motors. 2. Service conditions The capacitor should be prevented from exposing in sunlight directly and rain or snow will cause fall of insulation between terminals and terminals to case of the capacitor. Followings are detailed service conditions. 2.1 Altitude: Not exceeding 2000 meter. 2.2 Residual voltage while loading: Not exceeding 10% rated voltage. 2.3 Pollution: The capacitors are suitable to operating in lightly polluted atmospheres. 3.Overloads 3.1 Maximum permissible voltage Not exceeding 1.1 times the rated voltage. 3.2 Maximum permissible current Not exceeding 1.3 times the current that occurs at rated sinusoidal voltage and rated frequency. 3.3 Maximum permissible reactive output The overloads resulting from operation at voltage and current exceeding the rated values (even though within the limits indicated in 3.1 and 3.2) should be less than 1.35 times the rated output