Electrostatic generator

high-voltage

Meltblown non-woven electrostatic electret high voltage generator : Points to note for high voltage power products: The enclosure of this equipment must be reliably grounded in accordance with the standards of the electrical code, and the grounding sequence must not be wrong, otherwise it will cause irreversible equipment damage or personal electric shock. When this equipment is used to provide high-voltage power for pulse equipment, due to the distribution of the capacitance and inductance of the line, ringing or resonance may occur and cause interference or even damage to other equipment. Therefore, the length of the high-voltage and ground wires should be shortened as much as possible If necessary, you can consider connecting a high-voltage resistor in series in the high-voltage output circuit to cancel possible resonance. Installation of high-voltage output connection components must comply with relevant regulations and select corresponding pressure-resistant products to avoid fire and breakdown of components and corona during work. When the power supply is fully loaded, the input power is close to 1.5KW and the current is 7A The power supply access line should have sufficient load capacity. When the voltage fluctuation exceeds the standard area or the power supply voltage drops below 190V after loading, you can consider connecting to a voltage stabilization device. Under different output voltages, the power conversion efficiency of the power supply will be different. If the output voltage is too low or the ambient temperature is too high for a long time, the internal power components will overheat and shorten the life of the device.