Anti-corrosion coating spraying

industrial

It is generally accepted that airless spraying is the best method of applying anti-corrosive coatings for re-ability, versatility, and speed of operation, including alkyds, chlorinated rubbers, polyurethanes, high-build epoxies, and protective and decorative materials. Paint saves more than 30%. After testing, airless spray paint transfer efficiency is up to 78%. Compared with traditional air spray, the paint saves rate is as high as 37%. The initial investment cost of airless spray is more elevated than conventional air spray. However, the actual return on investment is relatively short. The paint fog rebounds low. Because the airless spray can completely atomize the paint without high air pressure, almost no paint mist can be scattered and bounced during spraying, which can not only reduce the health of the operator. Hazard can reduce pollution to the environment. The production speed is fast, and the film thickness of the airless spray is thicker so that the actual operation does not need to be repeatedly sprayed, thereby reducing the possibility of overspray, so that the entire spraying process is smooth and uninterrupted, and the work efficiency is higher. Spraying efficiency of up to 500-1200 square meters per hour, more than ten times that of traditional drum construction. Excellent surface quality. The spray coating is smooth, dense, and free of brush marks, marks, and particles. Extend the service life of the coating. High-pressure airless spraying enables the coating particles to penetrate the wall space so that the paint film also forms a mechanical bond on the wall surface, enhancing the adhesion of the paint and prolonging the service life.