Antiadhesive agent BIO-TEC 1200

BIO-TEC 1200 is a protective agent for asphalt and tar based on high-quality mineral oils. Creates a well-adhesive protective film and should be used as precautionary. Protects against the adhesion of asphalt and tar residues and facilitates cleaning. Has anti-rust properties which will extend the life of the installation. BIO-TEC 1200 should always be used undiluted. Applications Asphalt plants, Asphalt transport vehicles, Asphalt production machines, Road construction machines, ... Can be applied by brush, roller or spray unit. Always ensure adequate ventilation. Contains no harmful acids and does not attack paint or rubber. A test is recommended before using the product. Should always be used undiluted. Spray equipment or machines that are in constant contact with asphalt, e.g. finishers, batch plants,... Always use preventively as an anti-sticking agent to keep transport units, small equipment and tools, clothing, etc. clean. Spray enough until the surface is visually covered with oil. If oil drips off, try to dose slightly less. Flash point COC - °C - 198 Acidity - mgKOH/g - 1.5 Worked penetration - °C - >250 Water content - ppm - <1000 Refractive index at 20°C - - 1.465 Density at 25°C - kg/l - 0.880 Freezing point - °C - -9 Peroxide index - meq/kg - 6.0 Vapor pressure at 20°C - kPa - <0.01