Encoder evaluation board simpleRTK3B Pro

simpleRTK3B Pro is a standalone board that allows to evaluate triple band RTK GNSS technology. It’s based on Septentrio mosaic-X5 module and is fully compatible with Arduino, Raspberry Pi, Nvidia Jetson Nano and STM32 Nucleo platforms, as a shield. Check out simpleRTK3B page to learn more. Good to know: – This product is compatible but doesn’t include a multiband GNSS antenna, which is necessary to use the product. – The module will not give good performance with a standard GNSS antenna, requires a multiband one. Best performance is achieved with a triple band antenna. – This product is compatible but doesn’t include radio, which is necessary to connect to another base. – This board is recommended if you want to test Septentrio mosaic-X5 performance. – Compatible with all Ardusimple XBee socket accessories (4G modem, MR/LR/XLR radios, Bluetooth, WiFi, Ethernet, Dataloggers, RS232) – Compatible with Ardusimple plastic case – Ardupilot compatible via JST-GH standard connector You can use simpleRTK3B as a standalone board or as an arduino shield. The main component of simpleRTK3B is Septentrio Mosaic, in it’s different variants: Mosaic-X5 Triple Band (L1/L2/L5) RTK GNSS module. Mosaic-H Dual Band (L1/L2/E5b) dual antenna RTK+Heading GNSS module. If you are an advanced Septentrio GPS user, you might want to have a look at the extensive Septentrio documentation: https://www.septentrio.com/en/supportresources/modules Important before use: This is a traditional RTK module, it only finds satellites outdoors. If you try to use it next to the Window it will not find any satellites. The module needs 10 seconds to boot, be patient after connecting to the PC