Vacuum casting machine Agatronic W , M , K

overpressure

The vacuum-pressure casting machines of the Agatronic W, M and K series are combined devices with a built-in low frequency induction furnace for casting jewellery with the use of the investment casting method. A special microprocessor controller constructed on the basis of the latest solutions in the field of industrial automation watches over the course of the process. The controller communicates with operators via a 7 inch TFT touch screen. In this fully automatic machine the casting process is carried out according to a programmed algorithm, also called a foundry programme, and the operating activities are limited only to filling the crucible with an alloy, placing the proper flask in the chamber and pressing the START key. After about 3-4 minutes the device opens the casting chamber itself and informs you about this fact with an audible signal. In addition, 15 minutes after the flask has been filled, the machine controller will remind you to insert the flask into the water. Thanks to this solution the machine can be operated by employees after a short, maximum 15-minute training, without any experience in the jewellery casting industry. The user can also use the vibrator function. While filling the flask with liquid metal, the casting chamber vibrates at a constant frequency, which accelerates the process of filling the flask and increases the homogenization of the alloy.