O-ring seal TSS seriesroundNBRplastic
Add to favorites
Compare this product
Characteristics
- Type
- O-ring
- Configuration
- round
- Material
- NBR, plastic, PTFE
- Application
- rod, cutting
- Other characteristics
- dynamic
- Temperature limit
Min.: -30 °C
(-22 °F)Max.: 120 °C
(248 °F)- Pressure limit
600 bar
(8,702.3 psi)- Diameter
Min.: 4 mm
(0.157 in)Max.: 250 mm
(9.843 in)- Outer diameter
Min.: 8.9 mm
(0.35 in)Max.: 270.5 mm
(10.65 in)- Speed
15 m/s
(49.2 ft/s)
Description
The TSS rod seal is composed of two rings. The dynamic seal is a ring in filled PTFE while the static
seal is an O-Ring also acting as energizer.
Bronze-filled PTFE for the standard type, and is NBR (Nitrile butadiene rubber) O-Ring.
Compound reference: TN
PTFE seals require careful assembling operations in comparison to other types of seals It is necessary to
remove flashes and/or cutting edges in the grooves.
The rod seal is usually assembled in the following sequence:
fit the O-Ring into the groove
twist the PTFE ring using a mandrel and a expansion bush;
calibrate with a plastic conical tool
Catalogs
No catalogs are available for this product.
See all of ARTIC SEALS‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.