Double lip seal RPS seriesroundpolyurethanerod
Add to favorites
Compare this product
Characteristics
- Type
- double lip
- Configuration
- round
- Material
- polyurethane
- Application
- piston, profile, rod
- Fluid
- for mineral oil
- Other characteristics
- abrasion-resistant
- Temperature limit
Min.: -35 °C
(-31 °F)Max.: 110 °C
(230 °F)- Pressure limit
400 bar
(5,801.5 psi)- Diameter
Min.: 4 mm
(0.157 in)Max.: 200 mm
(7.874 in)- Outer diameter
Min.: 8 mm
(0.315 in)Max.: 220 mm
(8.661 in)- Shore A hardness
93 unit
- Speed
0.5 m/s
(1.6 ft/s)
Description
The RPS seal type combines in one solution two different installations and applications.
With two symmetrical lips, it can be used both for rod and piston sealing applications and for cylinders
working with simple or double effect.
The profile with equal lips and the deep groove ensures low friction and a linear movement even at
low pressure.
The proposed material is a “C0” type polyurethane, with high elasticity modulus, fundamental for the
sealing, low compression-set and high abrasion resistance.
Compound reference: C0
The high modulus of elasticity of the polyurethane helps the assembling.
It is recommended to lubricate the seals before installation and to eliminate any edges or flash which could damage the seal.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.