Lip seal PAE seriesroundpolyurethaneresin
Add to favorites
Compare this product
Characteristics
- Type
- lip
- Configuration
- round
- Material
- polyurethane, resin
- Application
- piston, edge, cutting
- Fluid
- for mineral oil
- Other characteristics
- anti-extrusion
- Temperature limit
Min.: -35 °C
(-31 °F)Max.: 110 °C
(230 °F)- Pressure limit
400 bar
(5,801.5 psi)- Diameter
Min.: 25 mm
(0.984 in)Max.: 120 mm
(4.724 in)- Outer diameter
Min.: 40 mm
(1.575 in)Max.: 140 mm
(5.512 in)- Shore A hardness
93 unit
- Speed
0.5 m/s
(1.6 ft/s)
Description
The PAE seal type is specially designed for heavy duty applications.
When the coupling clearance between bore and piston cannot be reduced and the pressure is very
high - above 250 bar - the PAE seal type, thanks to a strong anti-extrusion ring, is among the most
appropriate of seal types.
The material used for the seal is polyurethane C0- type at 93 Shore A with high elasticity module. The
anti-extrusion ring is made of acetylic resin R0-type reinforced with fibreglass and with high tensile
strength.
Compound reference: CR
The assembling of this seal is done in semi-open groove.
The anti-extrusion ring should be installed after theseal.
It is important to remove any flash or cutting edge on the piston not to damage the seal during the
overlapping.
Catalogs
No catalogs are available for this product.
See all of ARTIC SEALS‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.