Lip seal WSL serieswiperroundpolyurethane
Add to favorites
Compare this product
Characteristics
- Type
- lip, wiper
- Configuration
- round
- Material
- polyurethane
- Application
- compression, profile, rod, cylinder
- Other characteristics
- dynamic, static, flexible
- Temperature limit
Max.: 110 °C
(230 °F)Min.: -35 °C
(-31 °F)- Diameter
Max.: 250 mm
(9.843 in)Min.: 5 mm
(0.197 in)- Outer diameter
Max.: 265.2 mm
(10.441 in)Min.: 12 mm
(0.472 in)- Shore A hardness
93 unit
- Speed
1 m/s
(3.3 ft/s)
Description
The WSL wiper has a high flexible wiping lip on the dynamic side and a strong, shorter, protruding lip on the static side.
This special profile keeps the rod and the static side where it is housed free from any impurity, waste or water. Impurities would damage the seal and corrode the inner part of the cylinder.
The material used is a polyurethane with a high modulus of elasticity, low compression set and high
wear resistance.
It is not very problematic as it can be done in semi- open groove located in the nearest part outside the
cylinder.
Remove cutting edges and flashes to avoid the scratching of the wiper during the installation.
For further information please refer to the installation instructions on page 26.
Catalogs
No catalogs are available for this product.
See all of ARTIC SEALS‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.