Wiper seal WAT seriesdouble lipSteppolyurethane
Add to favorites
Compare this product
Characteristics
- Type
- double lip, wiper
- Configuration
- Step
- Material
- polyurethane
- Other characteristics
- static, flexible
- Temperature limit
Min.: -35 °C
(-31 °F)Max.: 110 °C
(230 °F)- Diameter
Min.: 16 mm
(0.63 in)Max.: 125 mm
(4.921 in)- Outer diameter
Min.: 24 mm
(0.945 in)Max.: 140 mm
(5.512 in)- Shore A hardness
93 unit
- Speed
1 m/s
(3.3 ft/s)
Description
The WAT wiper can be self-aligned in case of rod misalignment during operations, thanks to its special profile and design,.
It presents two lips and it’s similar to a seal: the scraping lip is longer, very flexible and dynamic; the static lip is shorter and stops the impurity sticking to the blocking step.
The proposed material is a “C0” type polyurethane, with high elasticity modulus, low compression-set and high abrasion resistance.
Compound reference: C0
It is also possible to use harder polyurethanes for heavy polluted environments.
In case please contact our technical department.
The assembling is extremely easy because of the semi-open groove.
Remove flashes an/or cutting edges in the housing.
For further information please refer to the installation instructions on page 26.
Catalogs
No catalogs are available for this product.
See all of ARTIC SEALS‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.