Wiper seal WEL seriesroundpolyurethanecutting
Add to favorites
Compare this product
Characteristics
- Type
- wiper
- Configuration
- round
- Material
- polyurethane
- Application
- profile, cutting
- Temperature limit
Max.: 110 °C
(230 °F)Min.: -35 °C
(-31 °F)- Diameter
Max.: 131.4 mm
(5.173 in)Min.: 31.4 mm
(1.236 in)- Outer diameter
Max.: 140 mm
(5.512 in)Min.: 40 mm
(1.575 in)- Shore A hardness
93 unit
- Speed
1 m/s
(3.3 ft/s)
Description
The WEL wiper type is commonly used in simple effect cylinders open on one side.
Because of its cleaning function, a reverse profile wiper is used to prevent bore wearing which may be caused by atmospheric agents, condensation and other environmental conditions.
The proposed material is a “C0” type polyurethane, with high elasticity modulus, low compression-set and high abrasion resistance.
The hardness is 93 Shore A ± 2.
Compound reference: C0
The assembling is done by overlapping in semi-open groove with a chamfer preventing the wiper extrusion during the cycle inversion. It is important to remove flashes or cutting edges to avoid damages.
Catalogs
No catalogs are available for this product.
See all of ARTIC SEALS‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.