Column type lifting device ELIC Series

The stainless steel ELIC column lifter is intended to work exclusively with tip carts or European standard hoist bins. In this case, the bins must be built according to DIN9797. They are intended to carry a homogeneous mixture of food product. The lifter has one hoist bin holding and docking structure. This structure is called cradle. The machine is powered by electricity and the main movements are controlled throughout electric push buttons. The hoisting movement is powered by an electric brake motor that prevents accidental falls when the electric power is down or when an electric malfunction occurs. It uses a roller chain for movement transmission. The lifter works with an unique and pre adjusted lifting height. The lifting movement is stopped in its highest or lower position by an electric position sensor. Controls The machine is controlled by electric push buttons. On the control box it's possible to find 3 push buttons. They control the upward and downward movement. The stop button allows the interruption of any movement. These movements are executed automatically without the need of keep pressing any buttons. On operation we can find an audible warning sign. Cradle This device carries the hoist bin into operation. It is design according to the hoist bin dimensions. It includes a safety clamping pedal and a tilt adjusting device. The clamping pedal avoids accidental hoist bin exit from cradle. On the other hand the tilt adjusting device adjusts the cradle according to the ground surface angle.