Electrically switched electro-permanent lifting magnet EPMH series

for sheet metalfor craneshandling

The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time. If you would not like the automatic mechanism, you still have the possibility to switch the magnets either directly on the device or with an optionally available remote control. Professional advantages: - Bypasses large air gap - Integrated control with signal lamps and acoustic warning - ADPREM function prevents random switching in the air - No electricity flows during lifting (only a short electrical impulse is required for magnetizing or demagnetizing) - The magnets can be switched manually through a push button or automatically through a pick-up mechanism.