Microfow Touch
The Microflow is used for blowing in small fibre optic cable 1- 5 mm. With the Microflow cable blowing is fully automated and operated by touch screen. The continuously variable operation speed and the maximum speed are preselectable. A micro sensor supervises the linear course of the fibre optic. A lateral swivel out due to the rising friction or obstacles will cause an immediate stop and the cable gets moved backwards.
Technical Data: -
max. speed: - 100 m/min
required air flow: - 1 m³/min
required air pressure: - 15 bar
required electric power supply:: - 230 V
rating: - 180 W
Order No. - 111.351.00
Microflow Log
Bestell-Nr. 111.351.50
The Microflow Log is for the same application like the Touch. But it is operated via a newly developed unit, which enables the issue of a protocol in accordance with the regulations of Deutsche Telekom. The log data can be transmitted via W-LAN or via mobile communications from the construction site to the client or the office.
Spare and wear parts
Adaption set
This is a complete set of format parts consisting of nylon fibre guide, wheels, top blowing junction block, bottom blowing junction block, fibre cable sensor arm and o-rings for the wheels. The Adaption set is available in different sizes and must be used according to the actual size of fibre cable and micro duct. Please specify the size of the fibre cable and micro duct.
Applicator
The applicator leads the cable into the Microflow. It is available in different sizes according to the actual size of the fiber cable.