SFP transceiver module EB30HDRT-MM

The EB30HDRT-MM is an electrical SFP Transceiver module designed to transmit and receive SDI signals up to 2.97Gbps over 75Ω coaxial cables over 75Ω HD-BNC connectors. Cable driver provides two selectable slew rates in order to achieve compliance to SMPTE 424M/SMPTE 292M and SMPTE 259M. Equalizer features DC restoration to compensate for the DC content of SMPTE pathological test patterns. The Autosleep feature automatically enables the equalizer power Save Mode when no input signal is detected. The EB30HDRT-MM provides module identification information and diagnostic monitoring through a 2 wire serial interface. It is also hot-pluggable solution for in field system upgrade and maintenance. EB30HDRT-MM is interchangeable with others MSA pinout optical video SFP improving product flexibility. The module is SMPTE compliant resulting in quick time-to-market and reduced development effort and cost. The EB30HDRT-MM is Pb-free and RoHS compliant. SMPTE 424M, SMPTE 292M, and SMPTE 259M compliant HD-BNC 75Ω connectors Rx Equalizer: Equalizes Belden 1694A cable up to: 140m at 2.97Gb/s, 200m at 1.485Gb/s and 400m at 270Mb/s Integrated Tx Cable Driver Supports DVB-ASI at 270Mb/s Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI Hot-pluggable Control via serial interface including: Output slew rate (SD or HD/3G) Input signal detection (RX_LOS) Voltage & Temperature Monitoring Module Information Autosleep feature on Rx channel Low Power Consumption – typical 485mW Single Supply +3.3V Pb-free and RoHS compliant Operating temperature range: -40°C to 80°C