Hour counter 661 series

analogelectromechanicalindustrial

Hour counters for DIN rail mounting, for AC or DC, overall height 60 mm or 64 mm With its overall height of 60 or 64 mm it is an ideal counter program for DIN rail mounting. A part of these AC or DC counters are produced with two decimals and special terminals (liftprinciple) values in just one single housing. Housing: Plastic light grey RAL 7035 Gearing: Plastic Counting range: 99999,99 Digits: 1,8 x 3,6 mm, white on black, decimals black on white Voltages: 115 or 230 V AC Special voltages: (additional charge) 24, 48, 400 V AC Voltage tolerance: ±10 % Frequency: 50 or 60 Hz (on request 20 to100 Hz) Power consump.: < 2 VA Ambient temp.: –10 ° C to +70° C Stocking temp.: –40 ° C to +80° C Elec. connection: Terminal Blocks (lift principle) with Philips-Head-Screw (+/– screw) in combination with slotted screw with 3 mm screwdriver size, 0 – 2.5 mm² fine wire or 0–4 mm² single wire clamp 2 and 3 (1 and 4 n. c.) Electromechanical hour counters DC: 666.6, 666.7 Housing: Plastic light grey RAL 7035 Gearing: Plastic Counting range: 99999,99 Digits: 1,8 x 3,6 mm, white on black, decimals black on white Voltages: 12 – 24 V DC Special voltages: (additional charge) On request Voltage tolerance: ±10 % Frequency: Power consump.: < 1 VA Protection (front): IP 65, screws IP 20 Ambient temp.: –10 ° C to +70° C Stocking temp.: –40 ° C to +80° C Elec. connection: Terminal Blocks (lift principle) with Philips-Head-Screw (+/– screw) in combination with slotted screw with 3 mm screwdriver size, 0-2.5 mm² fine wire or 0–4 mm² single wire clamp 2 and 3 (1 and 4 n. c.)