Volumetric injector FL-11

grease

Higher injector outputs make these units well suited to satisfy lubrication needs of medium and large machines. In addition, higher output pressures of make injectors ideally suited for equipment operating in harsh environments. Single and manifold type for dispensing fluid lubricant and grease. Recommend NLGI #2 grade grease or lighter. Installation Output Adjustment The FL-11 injector’s output is adjusted with the hex screw on top. Minimum output of approximately .050 cu. in. is obtained when the adjusting screw is turned into the injector, hand tight. To obtain the maximum output of .500 cu. in., start at the minimum setting and turn the screw approximately 12 turns, out of the injector. Each turn of the screw is approximately .040 cu. in. output. When the injector is adjusted to a half turn open or less, output from the injector should be verified.