The regular FAEBI® element is available in many sizes and variants, depending on your application. Should you require assistance with the selection, please do not hesitate to contact us. You find your local contact person here.
Advantages compared to steel springs
In comparison to steel springs the use of air spring offers many advantages when used for vibration insulation:
Flexible insulation system design: Changes in the static or dynamic loads can be compensated for by adjusting the air pressure. This can be performed either manually or pneumatically (e.g. using Bilz level control)
Integrated damping, therefore separate damping is not necessary.
No transmission of structure borne noise
TECHNICAL DATA AND VARIANTS
Variant selection
Please select a suitable rubber air spring so that the maximum load (sum of static and dynamic load) is not exceeded.
Hard FAEBI® variants reduce the deflection of the isolators in applications with high dynamics. The softer the isolator, however, the better the achievable isolating effect
Please get in touch, we would be happy to assist you in selecting the most suitable elements.
Notes on FAEBI® variants
If the bottom edge of the machine does not completely cover the diameter (∅ D) of the rubber air spring, we recommend the use of our special cover (see “Accessories” section for the individual air spring types).
Permissible temperature range: -20 °C to +60 °C
The elements are attached to the holes provided on the machine using the bolts supplied. Anchoring to the floor is usually not necessary.
Please bolt in by hand only, do not use a wrench! Please also fasten the corresponding nut with low torque only.