Very low-frequency (vertical 1.7 Hz) membrane air spring with precisely adjustable degree of damping for effective vibration isolation. Made of cast aluminium, universally applicable.
GENERAL PRODUCT DESCRIPTION
Description
Series BiAir®-ED-HE in cast aluminium
The BiAir® membrane air spring insulator is made of cast aluminium. The air space is enclosed by a thin-walled flexible and pressure-resistant rolling membrane. The piston sits on the membrane and is pressed into place by the air volume.
This design allows for highly effective vibration isolation. In order to simultaneously achieve the greatest possible damping effect, the interior of the air spring is divided intotwo air chambers connected by an air hose (load and damping volume). An adjustable throttle valve is used to set the flow cross section to the desired damping effect from the outside. The friction in the air flow generated by the throttle valve can create a damping effect of up to 15 %.
Damage to the rolling membrane due to overpressure is virtually impossible through the use of additional safety valves or a mechanical piston stroke limit.
TECHNICAL DATA AND VARIANTS
General information regarding selection and application of our BiAir® ED-HE membrane air springs
The maximum permissible movement amplitude in the horizontal plane is between approximately 1 to 2 mm depending on the size of the air spring.
Please select the load at an air pressure of 4 bar when selecting the air spring size.
Permissible temperature range: -20 °C to +80 °C
In addition to the standard solutions listed here we also offer numerous air springs with a larger stroke and lower natural frequency.