Rotor mixer D38 series

stainless steelpilotlaboratory

PILOT/LABORATORY D38 MAGNETIC MIXER ASSEMBLIES An ideal solution for transitional applications (from laboratory to pilot scale). D38 series mixers have proved themselves suitable even for 200 L tanks. In the proposed design, a gap between the outer rotors and the hermetic containment housing is maintained in order to avoid grinding between rotating and static elements. Simultaneously, two concentric lines of suction slots were machined into the body of the outer rotor. The upper layer slots guide the liquid in such a way, so that the movement on the boundary layer during rotation would be directed towards the gap between the containment housing and outer rotor. In the vicinity of the lower suction slot layer the flow direction is opposite that of the upper layer, so that liquid would move from the air gap to the outside environment. Such design aspects, considering the suction slots, were envisioned, in order to avoid flow stagnation in the air gap between the outer rotor and the containment housing, which is crucial during both microorganism cultivation/fermentation processes and CIP procedures. Material in contact with product 316L Stainless steel, SiC, ZrO2 ,Silicone or Vitton Rotor type D38 series magnetic rotors Rated torque (per each rotor), N.m 10–30 Containment housing outer diameter, mm 38 Agitation rate range, (depends on application) Working position Vertical Installation position Top or Bottom Maximal working temperature 80℃ Maximal temperature during sterilization 135℃ Maximal time during sterilization 60 minutes